using vista

multiecuscan program usage help
Post Reply
leew
Posts: 5
Joined: 19 Jan 2010, 21:00

using vista

Post by leew » 01 Mar 2010, 19:55

Anybody know how to configure ports on vista."ports" do not show up in Device Manager so I can't see how to adjust serial latency.Tho it must be possible!

Teos81
Posts: 22
Joined: 23 Feb 2010, 19:17

Re: using vista

Post by Teos81 » 02 Mar 2010, 16:04

Hi,
what type of Cable you use??
If it's a Vag kkl interface with the FTDI chipset, maybe you have installed the D2XX driver and not the VCP (virtual com port driver..)

If you go to the FTDI site (http://www.ftdichip.com/Drivers/VCP.htm) download the last driver for vista and install it (the manual for vista installation is here: http://www.ftdichip.com/Documents/InstallGuides.htm).

Bye Bye
Matteo
Registered 2.8.2 Italian user and EPS specialist

leew
Posts: 5
Joined: 19 Jan 2010, 21:00

Re: using vista

Post by leew » 06 Mar 2010, 21:24

Thanx for that I might be getting somewhere now!

Post Reply