Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

multiecuscan program usage help
Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 09 Aug 2013, 19:01

Hi Everybody.

I have a problem with connect by this interface to Abs,service,clima and every other option by multiecuscan v1.5. I can connect only to engine. I also was bought adapter yellow 1,9 can. Also not working.

My car Grande Punto 2008 1,4 8v.

Also tried with Linea 2007 1,4 8v also can connect just engine.

I want to remove service inspection: ,,Service Coupon Expired"

I was read that some ppl is removing any resistor from his interfaces. But I can't find this one in my interface.

Image
Image
Image

Full hd pics

http://images62.fotosik.pl/60/ec4abcdfaf360b76.jpg
http://images64.fotosik.pl/60/6e2db83e1ae898dc.jpg
http://images65.fotosik.pl/60/8a650b2c8df82291.jpg
http://images64.fotosik.pl/60/b7c345c306ef88a9.jpg


This was cheap one from ebay.
Cost 10$
Thx in advance for help.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 10 Aug 2013, 15:11

Hello Jordanodc

In this thread is about the same interface as your
Although your pictures are better, but I can not pursue traces still

viewtopic.php?f=5&t=1493&view=unread#unread

Also, I can not recognize which contacts the white plug
OBD Pin 6 and Pin 14 are?

Your pictures are good but I can not see how the MCP2551 chip was installed anyway.

And I enlarge your images, the unclear

It may not be the bridge resistor this interface has no one ?
And there is only one driver or setting problem??

Once use this driver :-)

http://www.ftdichip.com/Drivers/VCP.htm

Greetings Eddy


Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 10 Aug 2013, 19:13

Hello

In the pictures I can not follow the tracks and do not see how the MCP2551 is connected.

For all Windows versions of 2:08:30 is needed! 32 + 64 bit

The driver is required so that your PC can work with the interface
whether the connection via BT or USB cable is not relevant


Greetings Eddy

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 10 Aug 2013, 19:59

so if my elm is connecting with engine by multiecuscan i need to have installed this driver too?

i make another pics and i think now will be good

http://images64.fotosik.pl/61/eea3afdc2c9c75d7.jpg

http://images61.fotosik.pl/61/6200dd60d62c42e0.jpg

http://images65.fotosik.pl/61/f5bacb1282cc56a4.jpg

http://images61.fotosik.pl/61/74d06a1f6f959571.jpg

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 10 Aug 2013, 20:57

Hello

When Linea the ECU and the ABS is not read via CAN bus
Therefore, this is not a problem on the bridge resistance
And for the ABS of the Linea, you need the adapter A1 (green)

In your pictures, I can not follow, because the are not bigger and sharper
as the first pictures.
Also must go where the pin 6 +14 on the board just knowledge.


Greetings Eddy

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 10 Aug 2013, 21:03

Linea connrcting with engine nothing else.

I know that linea need green one.

but i have punto grande and adapter yellow not connecting.


So My elm is good so why nothing work Just engine.

I need to make better pictures for you?

If i connect with gp engine i have 7 bookmarks

if with linea engine i have 2 bookmarks.errors and first i forgot name.

I make betterpics tomorrow.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 11 Aug 2013, 06:32

Hello

I have your picture labeled times, pins 6 and 14 are correct?

I see the image in the conductors are transmitted to the back of the board.
I will therefore probably can not see, but it's worth a try

Greetings Eddy
6e2db83e1ae898dc  beschriftet.jpg
6e2db83e1ae898dc beschriftet.jpg (79.19 KiB) Viewed 5883 times

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 08:15

pins 6 14 is same how you Show on picture.
Last edited by Jordandc on 11 Aug 2013, 11:33, edited 2 times in total.

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 11:29

this is back side i signed it same numbers as your ring
6e2db83e1ae898dc  beschriftet.jpg
6e2db83e1ae898dc beschriftet.jpg (80.9 KiB) Viewed 5872 times
DSC_0056.jpg
DSC_0056.jpg (793.24 KiB) Viewed 5872 times
DSC_0055.jpg
DSC_0055.jpg (719.03 KiB) Viewed 5872 times
Last edited by Jordandc on 11 Aug 2013, 11:38, edited 1 time in total.

Post Reply