Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

multiecuscan program usage help
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 11 Aug 2013, 11:33

Hello

And explanation of the points 1 ; 2 ; 3??

I'm just marked to show that is not easy to follow the interconnects.

Greetings Eddy

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 11:42

DSC_0054.jpg
DSC_0054.jpg (753.31 KiB) Viewed 4119 times
DSC_0053.jpg
DSC_0053.jpg (741.29 KiB) Viewed 4119 times
DSC_0052.jpg
DSC_0052.jpg (691.43 KiB) Viewed 4119 times

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 11:46

DSC_0051.jpg
DSC_0051.jpg (785.83 KiB) Viewed 4119 times
DSC_0050.jpg
DSC_0050.jpg (731.67 KiB) Viewed 4119 times
DSC_0049.jpg
DSC_0049.jpg (722.81 KiB) Viewed 4119 times

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 11:48

DSC_0048.jpg
DSC_0048.jpg (749.63 KiB) Viewed 4120 times
DSC_0047.jpg
DSC_0047.jpg (745.7 KiB) Viewed 4120 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 11 Aug 2013, 12:07

Hello Jordandc

After close as possible persecution of the tracks I can not see any bridge resistor !

Thus, the interface should also Multiecuscan with the CAN bus protocol to read.

Greetings Eddy

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 12:40

so you think that all is good?

So why multiecuscan reading Just engine?

pls give Me any solution

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 11 Aug 2013, 23:26

Eddy i make a bad.
My interface is connecting to abs and engine in grande punto. No other. I want to remove service interval but can't connect to service option.

So you think that elm allow to connect other options? Hmm so if my elm is connecting to engine and abs this could be my computer problem?

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Alfaeddy » 13 Aug 2013, 06:27

Hello Jordandc

And on the steering??


For all other controllers you use the yellow adapter A3??

It really is not a computer problem!

Greetings Eddy

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 13 Aug 2013, 09:39

Eddy engine and abs working. Im not checked sterring, because I want just remove service inspection. I bought yellow adapter but also working. Fiat Linea is also connecting just engine, as I know Linea need adapter just to abs, I think.

So in my opinion this is interface problem.

Maybe can you through your eyes again.

Edit: As I see in Elm 327 Faulty thread, my interface is the first, which no one can solved problem =[

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: Elm 327 v.1.5 (V Gate Bluetooth) Connect problem

Post by Jordandc » 13 Aug 2013, 13:39

Eddy I own voltmeter and ohmometer If you tell me where to put + and - im not good electronic.

I really want to solve that elm. I think that this is resistor problem.

Post Reply