Multiecuscan

The program does not work with Airbag 3 pin connections.
Read "HowToUse" but the connection does not occur.
Cable is where and how to connect I know, but does not work.
Something can be done?

i dont understand "To connect to the airbag ECU you need to connect your cable to pin 3 of the OBD connector."
What should I do with standard OBD2 cable and adapter to Fiat 3 pin connector?

Do nothing!
Just plug and play.
To play with pins is necessary only if connect to car with OBD socket.

Airbag Ecu 46413633
1 drivers airbag
Still not connected!!!

Yani what do you think about this sh...t ??? =)

Hi,

I think that your car hs an old version of BREED airbag which is not supported by the program.

Yani

yani wrote:Hi,

I think that your car hs an old version of BREED airbag which is not supported by the program.

Yani

Maybe he needs to connect the battery plus to the connector?

BAS

bas wrote:
Maybe he needs to connect the battery plus to the connector?

BAS

Are you sure???????????????????????
Why???
Good joke

-FINN- wrote:

bas wrote:
Maybe he needs to connect the battery plus to the connector?

BAS

Are you sure???????????????????????
Why???
Good joke

Because it's recomended. I have this adapter: http://www.allegro.pl/show_item.php?item=908733058 but I did not have time to try it(with marea, only tested with stilo EOBD), but from what I read on another forum (in Polish) is just to do so.

EDIT: Well, U forced me to test interfejs and adapter on my marea.
When battery plus not connected, the led light on vag kkl is off and i can't connect. When battery plus is connected, the led light on vag kkl is on and i can connect(with airbag, abs and engine-i had to choose brava 1,6).
EDIT2:
Correct(with plus connector) adapter U can buy on ebay:
- in PL: http://cgi.ebay.pl/ADAPTER-OBD2-FIAT-3P ... 3a57d33f58
- in D: http://cgi.ebay.pl/Adapter-Stecker-Fiat ... 3ca9b134b1


BAS

Thanks=)
but I wrote that I know it!!!
Everywhere so answered, as you!!!!!!!!!!!!!!!!!