Fiat Brava 1.8 ´96(Not connected)

multiecuscan program usage help
-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Fiat Brava 1.8 ´96(Not connected)

Post by -FINN- » 10 Feb 2010, 23:15

The program does not work with Airbag 3 pin connections.
Read "HowToUse" but the connection does not occur.
Cable is where and how to connect I know, but does not work.
Something can be done?
Last edited by -FINN- on 10 Feb 2010, 23:34, edited 1 time in total.

-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Re: Fiat Brava 1.8 ´96

Post by -FINN- » 10 Feb 2010, 23:24

i dont understand "To connect to the airbag ECU you need to connect your cable to pin 3 of the OBD connector."
What should I do with standard OBD2 cable and adapter to Fiat 3 pin connector?

klimekkk
Posts: 15
Joined: 26 Jan 2010, 11:04

Re: Fiat Brava 1.8 ´96(Not connected)

Post by klimekkk » 11 Feb 2010, 06:23

Do nothing!
Just plug and play.
To play with pins is necessary only if connect to car with OBD socket.

-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Re: Fiat Brava 1.8 ´96(Not connected)

Post by -FINN- » 14 Feb 2010, 16:05

Airbag Ecu 46413633
1 drivers airbag
Still not connected!!! :(

-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Re: Fiat Brava 1.8 ´96(Not connected)

Post by -FINN- » 17 Feb 2010, 23:34

Yani what do you think about this sh...t ??? =)

yani
Site Admin
Posts: 1174
Joined: 06 Nov 2009, 16:40

Re: Fiat Brava 1.8 ´96(Not connected)

Post by yani » 18 Feb 2010, 06:35

Hi,

I think that your car hs an old version of BREED airbag which is not supported by the program.

Yani

bas
Posts: 143
Joined: 10 Feb 2010, 21:47
Location: Poland(Lodz)

Re: Fiat Brava 1.8 ´96(Not connected)

Post by bas » 21 Feb 2010, 01:53

yani wrote:Hi,

I think that your car hs an old version of BREED airbag which is not supported by the program.

Yani
Maybe he needs to connect the battery plus to the connector?

BAS

-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Re: Fiat Brava 1.8 ´96(Not connected)

Post by -FINN- » 21 Feb 2010, 12:39

bas wrote:
Maybe he needs to connect the battery plus to the connector?

BAS
Are you sure???????????????????????
Why???
Good joke :D :lol:

bas
Posts: 143
Joined: 10 Feb 2010, 21:47
Location: Poland(Lodz)

Re: Fiat Brava 1.8 ´96(Not connected)

Post by bas » 21 Feb 2010, 14:04

-FINN- wrote:
bas wrote:
Maybe he needs to connect the battery plus to the connector?

BAS
Are you sure???????????????????????
Why???
Good joke :D :lol:
Because it's recomended. I have this adapter: http://www.allegro.pl/show_item.php?item=908733058 but I did not have time to try it(with marea, only tested with stilo EOBD), but from what I read on another forum (in Polish) is just to do so.

EDIT: Well, U forced me to test interfejs and adapter on my marea.
When battery plus not connected, the led light on vag kkl is off and i can't connect.
zZdjęcia-0002.jpg
LED light is OFF
zZdjęcia-0002.jpg (135.06 KiB) Viewed 4961 times
When battery plus is connected, the led light on vag kkl is on and i can connect(with airbag, abs and engine-i had to choose brava 1,6).
zZdjęcia-0001.jpg
LED light is ON
zZdjęcia-0001.jpg (149.56 KiB) Viewed 4955 times

EDIT2:
Correct(with plus connector) adapter U can buy on ebay:
- in PL: http://cgi.ebay.pl/ADAPTER-OBD2-FIAT-3P ... 3a57d33f58
- in D: http://cgi.ebay.pl/Adapter-Stecker-Fiat ... 3ca9b134b1


BAS

-FINN-
Posts: 7
Joined: 10 Feb 2010, 23:07

Re: Fiat Brava 1.8 ´96(Not connected)

Post by -FINN- » 21 Feb 2010, 18:17

Thanks=)
but I wrote that I know it!!!
Everywhere so answered, as you!!!!!!!!!!!!!!!!!

Post Reply