no connection on 156 jtd

multiecuscan program usage help
Post Reply
laurentk
Posts: 4
Joined: 28 Jan 2010, 23:33
Location: france

no connection on 156 jtd

Post by laurentk » 07 Feb 2010, 23:44

Hi,

I've a probleme to connect on my ECU.

engine 156 1.9 jtd 1999 105ch, the software launch when i press F2, i've the massage as the soft seach after the ECU, but i come back on the fist page, the same on a 166 2.4 jtd 2001??
and i've following " how to use" for the usb port

someone had have the same probleme???
I begin to think my ECU isn't compatible with the soft, maybe ecu version is oldier because nothing is write on ( no ebd15 or other) only many number.

thanks a lot (sorry for my English) :roll:

laurentk
Posts: 4
Joined: 28 Jan 2010, 23:33
Location: france

Re: no connection on 156 jtd

Post by laurentk » 09 Feb 2010, 16:17

hi,

someone can tell me if my cable is ok?? i've join picture of it. thanks
Attachments
preview-IMG_6807.jpg
preview-IMG_6807.jpg (37.8 KiB) Viewed 4401 times
img_5249.jpg
img_5249.jpg (129.63 KiB) Viewed 4402 times

jpl250rs
Posts: 3
Joined: 05 Feb 2010, 20:14

Re: no connection on 156 jtd

Post by jpl250rs » 09 Feb 2010, 18:18

Hi
your cable is for use with k-Line .
Be sure you have choosen the same serial port in the software as your cable in windows settings.

regards

jp

laurentk
Posts: 4
Joined: 28 Jan 2010, 23:33
Location: france

Re: no connection on 156 jtd

Post by laurentk » 10 Feb 2010, 12:12

hi,

thanks to your answer.

it's the good cable , because in the options i can only choice k-line

Post Reply