service reset on Panda 4x4

multiecuscan program usage help
Post Reply
chris h
Posts: 1
Joined: 11 Jan 2012, 14:28

service reset on Panda 4x4

Post by chris h » 11 Jan 2012, 14:46

I am having a problem resetting the service light on a panda 4x4 1.2 55 reg. The ECU scan will not communicate with service option, also the engine management light is flashing constantly but there are no fault codes stored. The chassis No is ZFA16900000489186 can i go in under a different model or will this not work on this car.

Chris

Zwierzak
Posts: 35
Joined: 13 Apr 2011, 17:55

Re: service reset on Panda 4x4

Post by Zwierzak » 11 Jan 2012, 19:35

When you have hot engine try accelerate 3 times do 6500 RPM

Juggers2k
Posts: 185
Joined: 17 Jan 2011, 18:02
Location: Swansea, UK

Re: service reset on Panda 4x4

Post by Juggers2k » 12 Jan 2012, 11:27

Zwierzak wrote:When you have hot engine try accelerate 3 times do 6500 RPM
At the risk of asking a silly question, what does that achieve?
2008 Fiat Grande Punto 1.4 8v Eleganza

Zwierzak
Posts: 35
Joined: 13 Apr 2011, 17:55

Re: service reset on Panda 4x4

Post by Zwierzak » 12 Jan 2012, 12:43

chris h wrote:the engine management light is flashing constantly but there are no fault codes stored

Chris
I suppose that this is problem with phonic wheel adaptation.

Post Reply