VAG KKL cable connections

multiecuscan program usage help
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: VAG KKL cable connections

Post by Alfaeddy » 17 Dec 2013, 11:49

Hello Monax

Whoud you buy a ELM

This ELM have not an Bridge Resistor
The Seller has remove the Bridge Resistor
of my Infomation

ELM Interface usb
http://www.ebay.de/itm/160996649487?_tr ... EBIDX%3AIT

And a Adapter A3

http://www.ebay.de/itm/151015670657?_tr ... EBIDX%3AIT

Send him a greeting from me :D ( Eddy)


Greetngs Eddy

Gatter
Posts: 17
Joined: 18 Dec 2013, 13:58
Location: Hungary, Balaton

Re: VAG KKL cable connections

Post by Gatter » 19 Dec 2013, 15:42

Hahaha Check this out! My new chineese VAGKKL cable..
Airbag is soldered to pin4-5, instead of pin3! :D
ESP is soldered to pin11-12, instead of pin12-13. :D
After the modification it works properly.. So first of all you should check the cable for correct pinout. 8-)

VAG-409-KKL-USB-FIAT-ECU-scan.jpg
VAG-409-KKL-USB-FIAT-ECU-scan.jpg (83.03 KiB) Viewed 14396 times
Cable1.jpg
Cable1.jpg (153.5 KiB) Viewed 14396 times
Cable2.jpg
Cable2.jpg (169.58 KiB) Viewed 14396 times

alfa156sarajevo
Posts: 866
Joined: 12 Feb 2010, 09:03
Location: Sarajevo, Bosnia & Herzegovina
Contact:

Re: VAG KKL cable connections

Post by alfa156sarajevo » 31 Dec 2013, 18:16

Monax wrote:Eddy Thanks for answer. My order is failed. Minus 16$ for me(( Now i know that i need only ELM
On some Grande Punto models you can connect with KKL to service as I can remember but MES disconnects after some seconds...
www.alfadiagnostik.com
Diagnostic for Alfa Romeo, Fiat and Lancia cars
Repairing City Servo System - Power Steering on Fiat and Alfa cars
Airbag ECU reset - all vehicles, all cars, all brands and all models
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

alfa156sarajevo
Posts: 866
Joined: 12 Feb 2010, 09:03
Location: Sarajevo, Bosnia & Herzegovina
Contact:

Re: VAG KKL cable connections

Post by alfa156sarajevo » 31 Dec 2013, 18:40

Gatter wrote:Hahaha Check this out! My new chineese VAGKKL cable..
Airbag is soldered to pin4-5, instead of pin3! :D
ESP is soldered to pin11-12, instead of pin12-13. :D
After the modification it works properly.. So first of all you should check the cable for correct pinout. 8-)
Here is pinout for MES:
pin 1 - ABS
pin 3 - Airbag
pin 7 - Engine/Gearbox
pin 9 - EPS
pin 12 - XENON

On all OBD2 interfaces no matter for which group are they made (Vw, Audi, Ford...) pins 4 and 5 are always connected (soldered) together and on pin 16 is always plus (+) from battery.
www.alfadiagnostik.com
Diagnostic for Alfa Romeo, Fiat and Lancia cars
Repairing City Servo System - Power Steering on Fiat and Alfa cars
Airbag ECU reset - all vehicles, all cars, all brands and all models
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Gatter
Posts: 17
Joined: 18 Dec 2013, 13:58
Location: Hungary, Balaton

Re: VAG KKL cable connections

Post by Gatter » 02 Jan 2014, 15:57

Yes you're right, XENON is on the 12 pin.
But my main problem was the Airbag line. Which was soldered to pin 4-5, instead of pin 3! (Red cable)

D3LTA_NL
Posts: 1
Joined: 24 Feb 2014, 14:15

Re: VAG KKL cable connections

Post by D3LTA_NL » 24 Feb 2014, 14:18

Gatter wrote:Hahaha Check this out! My new chineese VAGKKL cable..
Airbag is soldered to pin4-5, instead of pin3! :D
ESP is soldered to pin11-12, instead of pin12-13. :D
After the modification it works properly.. So first of all you should check the cable for correct pinout. 8-)

VAG-409-KKL-USB-FIAT-ECU-scan.jpg
Cable1.jpg
Cable2.jpg

I have same cable :)

Can you send me picture of youre modifications?

hungtan
Posts: 2
Joined: 27 Feb 2014, 02:27

Re: VAG KKL cable connections

Post by hungtan » 27 Feb 2014, 02:33

D3LTA_NL wrote:
Gatter wrote:Hahaha Check this out! My new chineese VAGKKL cable..
Airbag is soldered to pin4-5, instead of pin3! :D
ESP is soldered to pin11-12, instead of pin12-13. :D
After the modification it works properly.. So first of all you should check the cable for correct pinout. 8-)

VAG-409-KKL-USB-FIAT-ECU-scan.jpg
Cable1.jpg
Cable2.jpg

I have same cable :)

Can you send me picture of youre modifications?
I have too. Can you say me, How do I connect my car. Skoda octavia 2.0tdi 103 kw 2004.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: VAG KKL cable connections

Post by Alfaeddy » 02 Mar 2014, 10:37

Hello hungtah

What software do you want to read your Scoda?
Because Multiecuscan can not connect to your vehicle.

That which is described here has nothing to do with your connection problem.

Greetings Eddy

hungtan
Posts: 2
Joined: 27 Feb 2014, 02:27

Re: VAG KKL cable connections

Post by hungtan » 02 Mar 2014, 13:43

Hello Alfaeddy!!
I tried with VAG-409 and VCDS-Lite-1.2 .v.v. All inactive.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: VAG KKL cable connections

Post by Alfaeddy » 02 Mar 2014, 18:52

Hello hungtan

As I've written
This is about Multiecuscan and not on VCDS

Why can not connect to the Skoda I do not know.

Greetings Edd

Post Reply