No ECU Response - Alfa 145 '96

multiecuscan program usage help
Post Reply
Mike_TS
Posts: 2
Joined: 30 Jul 2011, 11:27

No ECU Response - Alfa 145 '96

Post by Mike_TS » 30 Jul 2011, 11:33

Good day Everyone,

I have problems to connect the Engine ECU.
Multiecuscan tells me "NO ECU RESPONSE"

CAR: Alfa Romeo 145 '96
Engine: AR67204
ECU: Bosch Motronic 2.10.3 - 0 261 203 862
Diagnostic cable: Vag KKL/USB + OBD2/3-pin reduction
Driver version: FTDI 2.08.14
Fiat ECU Scan version: 3.0.3
Diagnostic cable is switched to pin 7 KKL/engine
Diagnostic cable is set to COM port 3 in Windows (usb-serial port - COM3)
Also in application Fiat Ecu Scan (Vag-com/KKL - COM3)
Latency is set to 1
Ignition is switched ON
External power supply on 3-pin reduction is connected to + pole of battery
Application Fiat Ecu Scan is registered/activated

Error message: "NO ECU RESPONSE - Check cable or port settings"

NOTE: ECU was successfuly connected with Fiat Examiner (original fiat diagnostic tool)

I sent error report from fiat ecu scan today (30.7.) 11:00 a.m.

Many Thanks for any help

Michal

Mike_TS
Posts: 2
Joined: 30 Jul 2011, 11:27

Re: No ECU Response - Alfa 145 '96

Post by Mike_TS » 20 Aug 2011, 10:16

It looks like nobody had this problem :( if you have any advice please let me know.

Many thanks

Mike

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: No ECU Response - Alfa 145 '96

Post by alfa156sarajevo » 22 Aug 2011, 10:17

Did you tried to connect with other FES version???
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Frank86
Posts: 1
Joined: 15 Apr 2018, 17:17

Re: No ECU Response - Alfa 145 '96

Post by Frank86 » 15 Apr 2018, 17:20

Hello,

I have got the exact same problem. All parameters are the same except that the car is from 1997 and not from 1996.

Does anyone know how to solve the problem?

Thanks in advance!

Post Reply