multipla 1.6 100 timing value

multiecuscan program usage help
Post Reply
multipla
Posts: 2
Joined: 09 Jul 2011, 09:35

multipla 1.6 100 timing value

Post by multipla » 09 Jul 2011, 10:00

After reading the ecu when idling the timing value is always 0.0 degrees. The desired timing value is working. Is that a normal value?

sorry for my bad englisch.
Attachments
ecu scan parameters.jpg
ecu scan values
ecu scan parameters.jpg (45.36 KiB) Viewed 1138 times
Top
multipla
Posts: 2
Joined: 09 Jul 2011, 09:35

Re: multipla 1.6 100 timing value

Post by multipla » 10 Jul 2011, 13:30

is it possible that multiecuscan can not read the timing value for this engine?
Top
Post Reply

Return to “Usage Q&A”