temperature sensor

piscinarasx · Post by **piscinarasx** » 06 Apr 2011, 17:00

I mounted the external temperature sensor on my puntoevo, now I have to configure the display and 'can do it with the multiecuscan

piscinarasx · Post by **piscinarasx** » 08 Apr 2011, 11:36

someone can 'help me please? wanted to know if possible with the multiecuscan enable the reporting of temperature on the display already' prepared.
talking puntoevo.

Gianremo · Post by **Gianremo** » 08 Apr 2011, 12:08

you must use PROXY Alignment but FES does not support it for Grande Punto/Evo yet. Alternatively you can use Leonardo to active it.

See you.

piscinarasx · Post by **piscinarasx** » 08 Apr 2011, 16:04

thanks so much for the information.

piscinarasx · Post by **piscinarasx** » 10 Apr 2011, 13:18

with version 2.8 will be 'possibile do thank you.

Post by **yani** » 10 Apr 2011, 13:42

No, unfortunately, the PROXI Alignment function for Punto Evo will not be available in next version.
Also, it seems to me that the PROXI procedure is not enough to activate this sensor. You have to turn ON this option in vehicle configuration, and I don't know how to do it for Punto Evo, yet.

Regards,
Yani

piscinarasx · Post by **piscinarasx** » 10 Apr 2011, 19:13

thank you very much

piscinarasx · Post by **piscinarasx** » 10 Apr 2011, 20:25

Hello Yani. say that you can 'do only with the Leonardo may possibly' be able to help to understand.

piscinarasx · Post by **piscinarasx** » 13 Apr 2011, 19:34

activities done by Leonardo.

Multiecuscan

temperature sensor

temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor

Re: temperature sensor