ABS Stilo JTD ???

multiecuscan program usage help
Post Reply
kecka
Posts: 37
Joined: 24 Nov 2009, 19:49
Location: czech

ABS Stilo JTD ???

Post by kecka » 24 Nov 2009, 20:03

Hi,
Thank you for the program a good ;) ;) ;) ;)

But I have a problem, you can not connect to the ECU ABS (Stilo JTD year 2002). As begins to connect and begin flashing lights ABS and ASR, But the connection does not ??????
Someone knows what it can be ???????

The ECU engine together without any problem :) :) :)

Excuse my English, I write from the Czech Republic :) :) :) :)
Last edited by kecka on 28 Nov 2009, 21:05, edited 1 time in total.
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS Sitlo JTD ???

Post by yani » 25 Nov 2009, 15:06

Hi,
I have tested the program on Stilo JTD with ABS 5.7 (without ASR) yesterday and it worked perfectly.
Anyway, I'm doing some fixes on the communication protocol timings now. Will post an updated version in a few days. Hope it will work for you.
Top
kecka
Posts: 37
Joined: 24 Nov 2009, 19:49
Location: czech

Re: ABS Sitlo JTD ???

Post by kecka » 25 Nov 2009, 18:48

That would be great :) :) :) :) :)

I also tried today Marea 2.4 JTD program immediately connect, but immediately disconnected. Made after each connection :( :( :(
It will be in the program about an error..... :( :(
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS Sitlo JTD ???

Post by yani » 25 Nov 2009, 18:59

Are you sure that your serial port is configured properly? It seems that it is not.
You need to lower the buffers to minimum and set the latency to minimum (for usb cables).
Top
kecka
Posts: 37
Joined: 24 Nov 2009, 19:49
Location: czech

Re: ABS Sitlo JTD ???

Post by kecka » 25 Nov 2009, 19:47

I have a cable to the serial port........
I have it set as follows......

Image
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS Sitlo JTD ???

Post by yani » 26 Nov 2009, 05:55

Your configuration seems to be correct.
Top
kecka
Posts: 37
Joined: 24 Nov 2009, 19:49
Location: czech

Re: ABS Sitlo JTD ???

Post by kecka » 26 Nov 2009, 15:29

if you have new information to Write.......
I'll go immediately to test.... :) :) :) :)

Thanks
Top
chudystilo
Posts: 6
Joined: 07 Dec 2009, 18:48

Re: ABS Stilo JTD ???

Post by chudystilo » 07 Dec 2009, 18:55

I have problem like a KECKA from Czech. Connect via BOSCH EDC15C7 CF3/EODB Diesel Injection is no problem, perfectly and make me a happy :) , But connect via BOSCH ABS .... is impossible. Display - disconnected :(
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS Stilo JTD ???

Post by yani » 07 Dec 2009, 19:01

Did you connect the cable to pin 1 of the ODB connector? You need to connect it to pin 1 for the ABS.
Top
chudystilo
Posts: 6
Joined: 07 Dec 2009, 18:48

Re: ABS Stilo JTD ???

Post by chudystilo » 07 Dec 2009, 19:08

Yesterday I connect Pin 1-7, and the problem with ABS communication.
Connected and disconnected triple times and nothing.
Flashing ABS/ASR icon. CONNECTED IS LOST and again try to connect. That`s all :cry:

Cable USB, FIAT STILO 1.9 JTD 2002
Top
Post Reply

Return to “Usage Q&A”