marea TD100 year 1997 3 wire connection

multiecuscan program usage help
Post Reply
mareadizlo
Posts: 5
Joined: 18 Oct 2010, 06:47

marea TD100 year 1997 3 wire connection

Post by mareadizlo » 18 Oct 2010, 11:17

I’m sorry if this question has been answered before, I have searched the forum but I haven’t find the answer.

I have Marea 1.9 TD 100 year 1997 and by Supported Vehicles list best interface to use is KKL?

Where I can find explanation how to connect to 3 wire connector on engine side ECU?

Only explanation I can find is how to modify connector to connect to ABS, AIRBAG.

tnx in advance…

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: marea TD100 year 1997 3 wire connection

Post by s130 » 18 Oct 2010, 18:55

The easy way is to puchase a 3 pin to EOBD connection lead.

If you Google the subject then you should find some useful links.

A point to note is that the Fiat 3Pin diagnostic connector does NOT have a 12V supply. This is why the 3-pin adapters come with an extra wire to connect to 12V.

Elm & I think KKL require a vehicle 12V supply to work.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

mareadizlo
Posts: 5
Joined: 18 Oct 2010, 06:47

Re: marea TD100 year 1997 3 wire connection

Post by mareadizlo » 19 Oct 2010, 06:39

Ok , tnx now I understand.
On ebay :
http://cgi.ebay.com/ebaymotors/Adapter- ... veQ5fTools

Best regards.

Post Reply