KKL Help!

multiecuscan program usage help
Post Reply
Exside
Posts: 26
Joined: 14 May 2010, 15:43

KKL Help!

Post by Exside » 22 Sep 2010, 21:23

Hello, I soldered pins 3,1,7,9. But I can not connect airbag
Immagine.Cosi place you tell me if I done something wrong
Thanks!
Attachments
2.jpg
2.jpg (499.87 KiB) Viewed 4149 times
1.jpg
1.jpg (558.06 KiB) Viewed 4149 times

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: KKL Help!

Post by s130 » 22 Sep 2010, 22:41

It is NOT recommended to connect all the pins together.

Pin 7 to 1 and 9 is OK BUT not to 3 at the same time.

7 to 1 and 9 is OK (ECU & ABS & EPS & Body) is OK

7 to 3 (ECU & airbags) is ok
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Exside
Posts: 26
Joined: 14 May 2010, 15:43

Re: KKL Help!

Post by Exside » 23 Sep 2010, 20:42

I did as you say you but it works ...
How should we set the KKL?
Thanks!

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: KKL Help!

Post by s130 » 24 Sep 2010, 09:40

Sorry I don't understand what you are actually asking.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Exside
Posts: 26
Joined: 14 May 2010, 15:43

Re: KKL Help!

Post by Exside » 24 Sep 2010, 18:24

How to set comport

mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: KKL Help!

Post by mattydr67 » 25 Sep 2010, 19:05

Change the lattency from 16 to 2.
That's all.
And try to select the com 1.
It is better.
Good luck

Post Reply