FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mattydr67 » 27 Oct 2013, 19:00

Well your tool is the one that we "treat" here in this thread.
If you'll read a littel bit you'll see that you need to remove the rezistor (R04 in most of the cases) which is soldered ( as a bridge ) between MCP2551 pins 6 and 7
This rezistor it an "121" ( writed on it ) in your first pics.
I also indicated it in the pic here.
So removed first then repaly back with review
Good luck
Attachments
IMAG0540.jpg
IMAG0540.jpg (177.59 KiB) Viewed 5436 times

MattBrera
Posts: 4
Joined: 25 Oct 2013, 18:08

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by MattBrera » 27 Oct 2013, 21:19

mattydr67 wrote:Well your tool is the one that we "treat" here in this thread.
If you'll read a littel bit you'll see that you need to remove the rezistor (R04 in most of the cases) which is soldered ( as a bridge ) between MCP2551 pins 6 and 7
This rezistor it an "121" ( writed on it ) in your first pics.
I also indicated it in the pic here.
So removed first then repaly back with review
Good luck
Thank you , I will give it a try and let you know how it works.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 27 Oct 2013, 21:41

MattBrera wrote:
MattBrera wrote:Hi Eddy,

I've bought a cheap cable from ebay - and its showing all OK on the tests, but when I try to connect to the car, I'm not having much luck.
I've got an Alfa Brera v6.
I'm not able to connect to any of the CAN bus interface.
The cable is showing as v1.5.
Any help would be appreciated - Thanks in advance.
IMAG0540.jpg
IMAG0542.jpg
Anyone have any ideas as to where I can even start?

Thanks
Hello MattBrera

Why I can not view your pictures?? :?: :?:

But Matty67 you replied yes.


Greetings Eddy

MattBrera
Posts: 4
Joined: 25 Oct 2013, 18:08

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by MattBrera » 28 Oct 2013, 14:57

Thanks mattydr67 and yes thanks Eddy - that works perfectly.

Another question, would I be able to change/upload a new engine map via this interface? I'm trying to find a way to increase the rev limiter for first gear, as its a bit too low.
I'm happy to buy some programs that can do this. I tried a 'simulate' option via multiecuscan, but did not find this feature anywhere.

Thanks,
Matt

mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mattydr67 » 28 Oct 2013, 16:11

No
You cannot do this with this cheap tool
For what you want you need an external programmer, or a passthru interface or Fiat Examminer
With other words with a flashing tool
Good luck

theodanila
Posts: 1
Joined: 30 Oct 2013, 07:36

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by theodanila » 30 Oct 2013, 07:45

Hi forum chaps,

I have the bundle shown in the pictures. It connect just fine with Torque on Android, but it does not connect with my Alfa GT ECU using MultiEcu Scan on Windows 7.

Any ideas please? I have searched this page, but did not find my exact model.
OBD1.jpg
OBD1.jpg (97.89 KiB) Viewed 5411 times
OBD3.jpg
OBD3.jpg (116.28 KiB) Viewed 5411 times
OBD2.jpg
OBD2.jpg (118.01 KiB) Viewed 5411 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 30 Oct 2013, 20:10

Hello

That you can not connect to Multiecuscan to your engine ECU
has nothing to do with the here-described problem.

Also to ABS (with adapter A1, green) should work in any case the connection.

But if you do the CAN setup. Service, proxy, etc. can not connect
Then drag from the top of the bottom board, (just fitted)
and make me another picture (with macro lens) from the inside of the board


Greetings Eddy

Bjorn
Posts: 4
Joined: 03 Nov 2013, 18:27

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Bjorn » 03 Nov 2013, 18:39

Hello,
I have a ELM327 interface from "autowolf.nl", I can connect to all ECU's except the engine ECU.
ScanningELM327.doc
(26 KiB) Downloaded 533 times
Do I need to remove a resistor?

Thx

mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mattydr67 » 03 Nov 2013, 18:53

What car, what ECU's did you connect?
Is that Ecu's on K-line or in CAN BUS?
Share more information
Good luck

Bjorn
Posts: 4
Joined: 03 Nov 2013, 18:27

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Bjorn » 03 Nov 2013, 20:05

Hello,

Alfa 159 1.9 8v mj 2008, dashbord, service, others, body, climate control, only engine not. Fault: no response.
It is a bit the same problem stefan has on page 47. I have the same interface. Alfafreddy said it should work without modifications.
I do not know if stefan found a solution

Thx

Post Reply