multiecuscan program usage help
-
Leonardo87
- Posts: 3
- Joined: 25 Nov 2018, 00:26
Post
by Leonardo87 » 25 Nov 2018, 01:14
Hi guys! Greetins from Brazil!
Here I purchased one interface with "PIC" chip. Can somebody help me, about wich resistor can I remove from my board? (I need to read the CAN, align PROXI and I cant!) Pics below... My car is one Fiat Stilo Abarth 2.4 20V 170cv. Thanks in Advance!!!
There is! Any help will be much appreciated! Mine board got the "PIC" chip.
Thank you guys!!
-
Leonardo87
- Posts: 3
- Joined: 25 Nov 2018, 00:26
Post
by Leonardo87 » 25 Nov 2018, 17:41
cxem wrote: ↑07 Aug 2018, 06:18
Your ELM327 works only with OBD-2 protocol
You need to buy ELM327 on a PIC chip
https://www.youtube.com/watch?v=TeeUCoppzJc
Despite the color, mine board got the PIC chipset and a lot of resistors... Only the number 1 removed. Dont read my Fiat Stilo CAN system...
Any help will be very very appreciated. Thanks!
-
Jordandc
- Posts: 23
- Joined: 09 Aug 2013, 18:20
Post
by Jordandc » 30 Nov 2018, 20:31
Problem with connect to grande punto Can
Its elm 327 wifi
-
Markoo
- Posts: 1
- Joined: 30 Nov 2018, 22:44
Post
by Markoo » 30 Nov 2018, 23:30
I have a problem with USB ELM327 Advanced OBD scan tool. I can not connect to my car (Fiat Stilo 1.9 Mjet). I reviewed the previous posts but I did not find the answer though someone already had the same problem as me. I can not connect my Chinese ELM327 with my car. What exactly should I do with my device? It's CH340C chip.
P.S.
I hope you can see the pictures.
-
Jordandc
- Posts: 23
- Joined: 09 Aug 2013, 18:20
Post
by Jordandc » 01 Dec 2018, 15:51
Elm 327 wifi from aliexpress
Grande punto can conection problem
-
Slasher
- Posts: 1
- Joined: 01 Dec 2018, 20:47
Post
by Slasher » 01 Dec 2018, 20:51
lucapi wrote: ↑19 Sep 2017, 19:16
Hello everybody,
I buy from aliexpress one obd2 cable 1.5a but MES show me error to try test
Code: Select all
COMMAND: ATZ
RESPONSE: ATZ
ELM327 v1.5
>
COMMAND: ATI
RESPONSE: ATI
ELM327 v1.5
>
COMMAND: ATE0
RESPONSE: ATE0
?
>
COMMAND: ATL0
RESPONSE: ATL0
?
>
COMMAND: ATH0
RESPONSE: ATH0
?
>
COMMAND: ATSPC
RESPONSE: ATSPC
?
>
COMMAND: ATS0
RESPONSE: ATS0
?
>
COMMAND: ATCAF0
RESPONSE: ATCAF0
?
>
COMMAND: ATCFC0
RESPONSE: ATCFC0
?
>
COMMAND: ATCRA 7B0
RESPONSE: ATCRA 7B0
?
>
COMMAND: ATSH 7B0
RESPONSE: ATSH 7B0
?
>
COMMAND: ATAT1
RESPONSE: ATAT1
OK
>
COMMAND: ATST41
RESPONSE: ATST41
?
>
COMMAND: ATBI
RESPONSE: ATBI
?
>
WARNING: This interface is not compatible with ELM 327 1.3! Will not connect to any CAN module.
have suggestion for resolve this problem?
Do you find the resistor?
Thanks