FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
goulbak
Posts: 5
Joined: 27 Jul 2018, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by goulbak » 27 Jul 2018, 14:12

Hi,
I bought a KONNWEI KW912, I need your help to make it fully working with multiecuscan.

Image
Image
Image

cxem
Posts: 28
Joined: 24 Jan 2015, 09:10
Location: Russia, Syktyvkar

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cxem » 30 Jul 2018, 07:08

CAN-Chip TJA1040
pin №6 and №7 remove the resistor

goulbak
Posts: 5
Joined: 27 Jul 2018, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by goulbak » 30 Jul 2018, 16:32

cxem wrote:CAN-Chip TJA1040
pin №6 and №7 remove the resistor
Image

goulbak
Posts: 5
Joined: 27 Jul 2018, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by goulbak » 30 Jul 2018, 22:17

Hi,
After removing the resistor..., can we use the ELM327 normally on others cars (like VW, Peugeot...)?

cxem
Posts: 28
Joined: 24 Jan 2015, 09:10
Location: Russia, Syktyvkar

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cxem » 31 Jul 2018, 05:01

1. Yes, it's him.
2. It is possible, the main thing that the ECU responds.

goulbak
Posts: 5
Joined: 27 Jul 2018, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by goulbak » 04 Aug 2018, 17:59

cxem wrote:1. Yes, it's him.
2. It is possible, the main thing that the ECU responds.
Thank you.

max_denim
Posts: 3
Joined: 05 Aug 2018, 21:42

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by max_denim » 05 Aug 2018, 22:05

good evening I'm new, thank you in advance because thanks to you I managed to change some interfaces.
I bought an elm327 v2.2 clone interface for a friend. not at the resistance between pins 6-14. but it does not work with Multiecu and alfaobd, with Torque or other yes. someone can help me.
thank you

max_denim
Posts: 3
Joined: 05 Aug 2018, 21:42

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by max_denim » 06 Aug 2018, 10:10

my interface is this.

ImageImage

goulbak
Posts: 5
Joined: 27 Jul 2018, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by goulbak » 06 Aug 2018, 19:11

max_denim wrote:my interface is this.

ImageImage
your interface is fake it dosn't have PIC18F25K80

cxem
Posts: 28
Joined: 24 Jan 2015, 09:10
Location: Russia, Syktyvkar

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cxem » 07 Aug 2018, 06:18

Your ELM327 works only with OBD-2 protocol
You need to buy ELM327 on a PIC chip
https://www.youtube.com/watch?v=TeeUCoppzJc

Post Reply