FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
gieboue
Posts: 5
Joined: 19 Feb 2014, 16:30

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by gieboue » 21 Feb 2014, 07:25

hi Alfaeddy in the red circle there is an R04 resistor.
Attachments
P1010006 (Large).JPG
P1010006 (Large).JPG (281.99 KiB) Viewed 4072 times
P1010002 (Large).JPG
P1010002 (Large).JPG (285.93 KiB) Viewed 4072 times

andro58
Posts: 3
Joined: 21 Feb 2014, 14:46

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by andro58 » 21 Feb 2014, 15:14

Hi, samebody can help me ? I bought the elm 327 bluetooth and it's work fine with motor module but when I try to connect to the body module the error connection appear. I use fiat multiecuscan 1.7

THANKS A LOT !!!!!!!!
Andrea
Attachments
20140221_154350 ridotta.jpg
20140221_154350 ridotta.jpg (379.9 KiB) Viewed 4070 times
20140221_154412 ridotta.jpg
20140221_154412 ridotta.jpg (361.9 KiB) Viewed 4070 times

juanito
Posts: 7
Joined: 20 Feb 2014, 22:22

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by juanito » 21 Feb 2014, 17:29

My elm is here v1.5 bluetooth. İ want to modifications this elm and i want to open cruise control. My car is fiat linea 1.3 95hp 2013 euro5
IMAG0386.jpg
IMAG0386.jpg (456.94 KiB) Viewed 4070 times
IMAG0388.jpg
IMAG0388.jpg (457.24 KiB) Viewed 4070 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 21 Feb 2014, 19:28

Hello Gieboue

Thank you for the better picture
Remove big the resistor R04, in the red frame

Greetings Eddy
P1010006 (Large)  markiert.jpg
P1010006 (Large) markiert.jpg (171.45 KiB) Viewed 4068 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 21 Feb 2014, 19:33

Hello Andrea

Even with your interface the resistor R04 is the problem
Remove R04 (red frame) and your interface will work


Greetings Eddy

d272b0cab2a2902c0621a25ee1de6934  markiert.jpg
d272b0cab2a2902c0621a25ee1de6934 markiert.jpg (68.55 KiB) Viewed 4068 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 21 Feb 2014, 19:51

Hello Juanito

Your picture is unfortunately very blurry.
I can not see any numbers on it.

Do not hesitate to a better picture of the area in the red circle

Greetings Eddy
IMAG0388  markiert.jpg
IMAG0388 markiert.jpg (269.16 KiB) Viewed 4068 times

juanito
Posts: 7
Joined: 20 Feb 2014, 22:22

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by juanito » 21 Feb 2014, 19:58

Hello again
not red circle in my elm v1.5 bluetooth. I remove r04 but i cant activate cruise control again. Thanks.
IMAG0391.jpg
IMAG0391.jpg (691.16 KiB) Viewed 4068 times
IMAG0392.jpg
IMAG0392.jpg (501.1 KiB) Viewed 4068 times

gieboue
Posts: 5
Joined: 19 Feb 2014, 16:30

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by gieboue » 21 Feb 2014, 21:24

thanks Alfaeddy i'll try it.

andro58
Posts: 3
Joined: 21 Feb 2014, 14:46

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by andro58 » 22 Feb 2014, 11:10

Hi Alfaeddy,
thanks for the answer ,
I have removed the resistor R04 but the problem is the same.. :cry:
do you have another solution?

thanks !

Andrea

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 22 Feb 2014, 18:40

andro58 wrote:Hi Alfaeddy,
thanks for the answer ,
I have removed the resistor R04 but the problem is the same.. :cry:
do you have another solution?

thanks !

Andrea


Hello Andrea

The red marked resistor is already correct

If your connection still does not work it may be the only driver to adjustment.

Just try this driver

http://www.ftdichip.com/Drivers/VCP.htm

Greetings Eddy

Post Reply