FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
VAG
Posts: 2
Joined: 06 Jul 2017, 09:53

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by VAG » 06 Jul 2017, 10:11

metnes71 have you set up the conection in settings in the program to ELM327 V1.3?

metnes71
Posts: 4
Joined: 06 Jul 2017, 09:36

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by metnes71 » 06 Jul 2017, 10:16

by vag

yes

Settings in the program to ELM327 V1.3? Where is this program

Other free programs worked

I had a multiscan sensor test
Sensors in the panel

GAlt
Posts: 7
Joined: 02 Sep 2016, 09:53

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by GAlt » 07 Jul 2017, 10:45

Hi guys, i my elm is wifi from the type that i attached. Everything worked great...kline, CAN, but now, something wrong and CAN communication not work. If you have some tips to make it work again, i will be very grateful?

Best regards
Attachments
IMG_20170707_133631.jpg
IMG_20170707_133631.jpg (3.71 MiB) Viewed 43364 times

slickkon
Posts: 3
Joined: 24 May 2017, 16:40

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by slickkon » 09 Jul 2017, 09:28

Hi All, my Device cannot connect to car.. error is 'CAN not supportted' can it be modified?

Car is 2009 Fiat Bravo T-Jet

Thank you..

IMG-20170709-WA0014.jpg
IMG-20170709-WA0014.jpg (234.09 KiB) Viewed 43349 times
IMG-20170709-WA0014.jpg
IMG-20170709-WA0014.jpg (234.09 KiB) Viewed 43349 times
IMG-20170709-WA0014.jpg
IMG-20170709-WA0014.jpg (234.09 KiB) Viewed 43349 times
Attachments
IMG-20170709-WA0013.jpg
IMG-20170709-WA0013.jpg (135.4 KiB) Viewed 43349 times
IMG-20170709-WA0012.jpg
IMG-20170709-WA0012.jpg (199.11 KiB) Viewed 43349 times

metnes71
Posts: 4
Joined: 06 Jul 2017, 09:36

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by metnes71 » 15 Jul 2017, 07:22

:!: :!:

[quote="metnes71"]help please
My car "for the 2010 model Fiat / Fiorino 1.3 MultiJet 75 HP emonatio the euro4"

I connected the device to pc no problem
I connected the car to the ECU no problem
Multiscan program recognized

but

Multiscan did not work any data

Multiscan gives photo messages!

What do I have to do

Elm327 to be modified
Elm327 will resist resistance

page number see you 226

breraB62
Posts: 1
Joined: 27 Jul 2017, 17:41

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by breraB62 » 27 Jul 2017, 18:01

Hi all,

New to forum, but not to alfas!!

I have an elm327 usb 1.5 which i got from fleabay.

I have searched throught this post to see if anyone has the same and there is one but it differs from mine in that my board comes away completely from the unit.
3.jpg
Board - Back, LEDs
3.jpg (173.32 KiB) Viewed 43220 times
2.jpg
Board - Main R2 (121) removed
2.jpg (187.73 KiB) Viewed 43220 times
1.jpg
1.5 Elm327
1.jpg (79.16 KiB) Viewed 43220 times
I have full version of FES 3.6.2 and i would like to reset the service indicator on my 2007 159 1.9JTDM as i now service it myself. Is it possible with the unit i have? I have already removed the R2 (121) resistor? I am having connection problems i.e. ATZ timeout etc which i will resolve, but just wanted to know if the unit i have will do the job i need.

I have attached images of the unit i have

Regards

John86
Posts: 1
Joined: 28 Jul 2017, 06:29

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by John86 » 28 Jul 2017, 06:43

Hi all. I bought this interface and i want to know which resistor and capacitor should be removed to work properly with FiatMultiecuscan. I think the R3 121 ohm must be replaced, but I'm not sure. Thanks for help.
Attachments
IMG_20170728_092318.jpg
IMG_20170728_092318.jpg (3.88 MiB) Viewed 43210 times

arcondi4
Posts: 1
Joined: 02 Aug 2017, 13:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by arcondi4 » 02 Aug 2017, 13:23

Hi friends.
Need help.
I have ELM327 mini and I have no network access to can.
Look at the photos.
Do I need to remove a resistor?
What?
Can you post the photos, please?
Attachments
IMG_20170802_094302552.jpg
IMG_20170802_094302552.jpg (2.28 MiB) Viewed 43160 times
IMG_20170802_094221672.jpg
IMG_20170802_094221672.jpg (2.03 MiB) Viewed 43160 times

oskar69
Posts: 2
Joined: 06 Aug 2017, 15:45

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by oskar69 » 06 Aug 2017, 16:12

Hi Guys,
iam buy ELM327 V2.1 OBD2 - i have MESU 3.7 Registred.
in PC is all installed and works fine, but iam able connetct only to engine.
my qestion is, are some resistor for remove in this version ?
Attachments
scr_20170806_1201.jpg
scr_20170806_1201.jpg (29.9 KiB) Viewed 43013 times
IMG_20170806_103110.jpg
IMG_20170806_103110.jpg (2.54 MiB) Viewed 43013 times
IMG_20170806_103035.jpg
IMG_20170806_103035.jpg (2.27 MiB) Viewed 43013 times

oskar69
Posts: 2
Joined: 06 Aug 2017, 15:45

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by oskar69 » 06 Aug 2017, 16:55

I found this ...
check by Multimeter
and tested on my Stilo MW 2003 JTD - all works fine
solution was remove this resistor
Attachments
IMG_20170806_184553.jpg
IMG_20170806_184553.jpg (1.92 MiB) Viewed 33557 times

Post Reply