FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 01 Sep 2012, 23:16

Hello

First of all, what Windows system you have on your computer?
32 bit or 64 bit?

And besides, both of the same driver 02:08:24

Try this driver

Greetings Eddy

Luckjs93
Posts: 5
Joined: 16 Aug 2012, 14:25

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Luckjs93 » 02 Sep 2012, 14:46

You mean this?

www.ftdichip.com / Drivers / CDM / CDM% 202.08.24% 20WHQL% 20Certified.zip

But once saved and opened, there is no inside. Exe file that will install

HELPPPPPP

stilo1.6
Posts: 12
Joined: 16 Aug 2012, 12:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stilo1.6 » 02 Sep 2012, 15:14

Hi I did everything you have said. Removed two resistance R04 and 2 capacitors soldered and still do not know what a proxy alignment procedure could be the problem? Help me please
Attachments
IMG_20120902_144713.jpg
IMG_20120902_144713.jpg (1.68 MiB) Viewed 6131 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 02 Sep 2012, 17:47

Hello Stilo

Again from the beginning!

I have said to you but that you have to remove the resistor R04!
Only the R04 no other

And I have not written anything of the additional resistors and capacitors!
That are not needed!

This FTDI driver is required if your interface is not recognized!

If your interface detected???
Please look in the Control Panel!

You should not listen to 2 members, it only confuses
Either one or the other!

Greetings Eddy

stilo1.6
Posts: 12
Joined: 16 Aug 2012, 12:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stilo1.6 » 03 Sep 2012, 07:58

Alfaeddy wrote:Hello Stilo

Again from the beginning!

I have said to you but that you have to remove the resistor R04!
Only the R04 no other

And I have not written anything of the additional resistors and capacitors!
That are not needed!

This FTDI driver is required if your interface is not recognized!

If your interface detected???
Please look in the Control Panel!

You should not listen to 2 members, it only confuses
Either one or the other!

Greetings Eddy

szia mi ez a FTDI meghajtó. sajnos ezt nem értem. Azt még meg próbálnám. köszönöm

stilo1.6
Posts: 12
Joined: 16 Aug 2012, 12:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stilo1.6 » 03 Sep 2012, 08:49

stilo1.6 wrote:
Alfaeddy wrote:Hello Stilo

Again from the beginning!

I have said to you but that you have to remove the resistor R04!
Only the R04 no other

And I have not written anything of the additional resistors and capacitors!
That are not needed!

This FTDI driver is required if your interface is not recognized!

If your interface detected???
Please look in the Control Panel!

You should not listen to 2 members, it only confuses
Either one or the other!

Greetings Eddy

hey what's with the FTDI driver. Unfortunately, I do not understand. I have yet to try. thank you

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 03 Sep 2012, 09:28

Hello Stilo

Have you installed the FTDI drivers?
FTDI Treiber.jpg
FTDI Treiber.jpg (182.81 KiB) Viewed 6122 times
If your interface detected without error?
Systemsteuerung.jpg
Systemsteuerung.jpg (41.46 KiB) Viewed 6122 times
Have you asked the Latency Time in 1?
Latency Time.jpg
Latency Time.jpg (143.01 KiB) Viewed 6122 times
Otherwise must be some other error

Greetings Eddy

stilo1.6
Posts: 12
Joined: 16 Aug 2012, 12:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stilo1.6 » 03 Sep 2012, 12:10

Képkivágás.PNG
Képkivágás.PNG (95.17 KiB) Viewed 6122 times
Képkivágás.PNG
Képkivágás.PNG (95.17 KiB) Viewed 6122 times
Alfaeddy wrote:Hello Stilo

Have you installed the FTDI drivers?
The attachment FTDI Treiber.jpg is no longer available
If your interface detected without error?
The attachment Systemsteuerung.jpg is no longer available
Have you asked the Latency Time in 1?
The attachment Latency Time.jpg is no longer available
Otherwise must be some other error

Greetings Eddy


Hi thank you very much for your help and the pictures but I still can not connect to CANBUS. Only motor. Error codes can be deleted. capacitors and resistors R04 and removed. FDTI installed and configured.
Attachments
Névtelen.png
Névtelen.png (230.69 KiB) Viewed 6122 times
Képkivágás2.PNG
Képkivágás2.PNG (186.24 KiB) Viewed 6122 times

bricca
Posts: 1
Joined: 03 Sep 2012, 12:25

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by bricca » 03 Sep 2012, 12:27

Luckjs93 wrote:You mean this?

www.ftdichip.com / Drivers / CDM / CDM% 202.08.24% 20WHQL% 20Certified.zip

But once saved and opened, there is no inside. Exe file that will install

HELPPPPPP

Hi, how to install this drivers? There is not an exe. Thank you very much.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 03 Sep 2012, 13:22

Hello Stilo

Of course, your problem is the CAN bus that everything you've removed and soldered it only relates to the CAN protocol.

Your engine control is read with ISO14230

Presumably you've destroyed your interface with your renovation

Once more:
Only the resistance R04 is removed!

Greetings Eddy

Post Reply