FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[Alfaeddy]

Hello

Nice that it works now.

Why your first ELM does not work I can not say.
But I've had at least 15 different ELM interface from all over the world
All of them have worked so far, either immediately or after removing a resistor either R04 or R14 depending on the interface

Have fun with your interface and Multiecuscan

Greetings Eddy

[cmiro]

hi , im from serbia i have problem with ELM 327 and proxy all....

My elm :







problem:

http://www.youtube.com/watch?feature=pl ... Uc-deN2Rls

thanxx

[Alfaeddy]

Hello

The connection to your control you've made​​.
Therefore is not your problem, the ELM interface but another
probably a faulty control or the connection is missing then the
the proxy can not be executed.

Because you've got a connection

Greetings Eddy

[fabio25]

CameraZOOM-20121115103255766.jpg (195.12 KiB) Viewed 5322 times

CameraZOOM-20121115103229078.jpg (219.68 KiB) Viewed 5322 times

Hello to everyone . I read all the messages but I can't find a fix to my problem ... Multiecuscan (and multiecuscan) can't see my ELM , I can not find it .I have the ELM on COM 5 but when I search it with multiecuscan the only thing I find is my modem ?!?!? on COM 7 . I have a fiat croma diesel from 2005 and the ELM works , I tested with another software ( i don't know if i can say the name here ...PPSCAN) Thank you

[Alfaeddy]

Hello

This interface we described here many times.
It does not have the abusive resistor

Have you ever loaded the new FTDI driver

http://www.ftdichip.com/Drivers/VCP.htm

Greetings Eddy

[fabio25]

Untitled.jpg (70.93 KiB) Viewed 5313 times

Hi . Yes , I have 2.08.24 on windows 7 . I tested the ELM with 3 different software and is working . With multiecuscan and multiecuscan I can't find it .

[fabio25]

Untitleddfs.jpg (50.01 KiB) Viewed 5312 times

Untitledss.jpg (44.88 KiB) Viewed 5312 times

When I search the ELM on COM 5 I get connection timeout . If a make auto search he finds my modem on COM 7 ?!? Thanks for your help Eddy

[Alfaeddy]

Hello

The fax modem on port 7 is an error your ELM is not recognized correctly.
And thus it makes Windows a fax modem

The drivers you have installed
- The interface to register once on a different COM port
- Ask the latency time to 1 (instead of 16)
- In the ELM Multiecuscan sign on your amended COM port? to
- Plug your interface into the OBD socket
- Switch on the dashboard lights
- Press F10 Connect


Greetings Eddy

[fabio25]

Hi Eddy ,

Thank you for your advices , now is working just fine .

Best regards from Italy

[Alfaeddy]

Hello Fabio

Very often, the error setting

I am glad that your interface now works.

Greetings Eddy