FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
h3nriquee
Posts: 2
Joined: 08 Aug 2017, 20:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by h3nriquee » 08 Aug 2017, 20:30

bigwolfys wrote:Hello, tell me what needs to be removed to connect to Fiat Punto 2 1.2 v8 2000

If I understand this correctly?
worked? its the same as mine
Attachments
20170427.jpg
ELM327 1.5a
20170427.jpg (3.58 MiB) Viewed 34627 times

h3nriquee
Posts: 2
Joined: 08 Aug 2017, 20:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by h3nriquee » 08 Aug 2017, 21:58

h3nriquee wrote:
bigwolfys wrote:Hello, tell me what needs to be removed to connect to Fiat Punto 2 1.2 v8 2000

If I understand this correctly?
worked? its the same as mine
ITS WORK FOR ME. R2 Resistor (121).

My car is Punto 1.8 8v International

norica
Posts: 1
Joined: 09 Aug 2017, 12:17

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by norica » 09 Aug 2017, 12:25

Hello,
i bought a [ ELM327 Interface 1.4 + yellow cable ] for reading Ecu of my Alfa Romeo Giuletta 1.6 JTDM.
I can't connect to Engine section, other sections are readable (more or less...).
Is it needed to remove the resistence? I looked many times but i dont find it.
Please helpme.
Many thanks.
WP_20170809_14_09_57_Pro.jpg
WP_20170809_14_09_57_Pro.jpg (1.89 MiB) Viewed 34620 times
WP_20170809_14_09_21_Pro.jpg
WP_20170809_14_09_21_Pro.jpg (1.83 MiB) Viewed 34620 times

Directors
Posts: 2
Joined: 11 Aug 2017, 12:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Directors » 11 Aug 2017, 12:45

Hello
I have a ELM 327 USB and I can't connect it to my Fiar Punto 2 1.2 16 V 2000 year car.
The error says: "interface was not found"
Can you please help? Should I solder the R2 resistor?
egyik.jpg
egyik.jpg (2.67 MiB) Viewed 34602 times
másik.jpg
másik.jpg (3.22 MiB) Viewed 34602 times

ste7game
Posts: 1
Joined: 24 Aug 2017, 14:55

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by ste7game » 24 Aug 2017, 15:06

Hi guys same problem as others: if I scan for an interface it says that it supports elm 1.4 and it should work with all CAN modules, but if I try to connect with it I always get a failure. This is my Kkmoon OBDII interface ver 1.5 , any resistor to remove? My car is : Punto Evo 1.3 Multijet 2009 and I also have the yellow adaptor
Image[/url]
Image[/url]

przemo83
Posts: 1
Joined: 23 Aug 2017, 15:19

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by przemo83 » 24 Aug 2017, 15:28

Hello everybody.
This is my ELM 327 V2.1 Interface
Which resistor to remove? On 6 and 14 pins i have 120ohm
How to make it? please.

Code: Select all

http://imgie.pl/image/0647
Image

celinefred
Posts: 1
Joined: 25 Aug 2017, 23:43

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by celinefred » 26 Aug 2017, 00:06

Hello, to help people :)
For this interface
Capture.PNG
Capture.PNG (149.85 KiB) Viewed 34527 times
You have to remove R2 resitance ( look at the red circle i draw)
20170825_153741.jpg
20170825_153741.jpg (141.63 KiB) Viewed 34527 times
And it will works for fiat idea 2010 1.3 mjt and fiat punto 1.3 mjt 2012 (for exemple)

Thenitrous
Posts: 2
Joined: 19 Jun 2017, 19:03

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Thenitrous » 28 Aug 2017, 10:38

Hi everyone, I have bought an PIC18F25K80 elm327 on aliexpress and am trying to make it work with mes, I have MES 3.7
I first of all tried it out without modifying it but it didn't work, after seeing that some one on aliexpress had made it work on MES by removing the 121 resistor, I tried but it still does not work...

I am trying to access the can network on a 147 phase 2 1.9jtdm 120 2006 version.

I can connect to the motor module without any problems but cannot connect to any other module, I have bought the various color cables I might need but still cannot connect correctly.

Here are the photos!

Thanks!

Many thanks!
IMG_20170828_122106.jpg
IMG_20170828_122106.jpg (2.39 MiB) Viewed 34495 times
IMG_20170828_122056.jpg
IMG_20170828_122056.jpg (2.05 MiB) Viewed 34495 times
1.jpg
1.jpg (4.59 MiB) Viewed 34495 times

Thenitrous
Posts: 2
Joined: 19 Jun 2017, 19:03

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Thenitrous » 28 Aug 2017, 10:40

last photo
the one I attached was blurry!

MES answer
Cette interface est compatible avec ELM 327 1.4! Devrait pouvoir se connecter correctement avec tous les modules CAN.

i.e should be compatible with all the can Modules...
Attachments
IMG_20170828_122112.jpg
IMG_20170828_122112.jpg (2.79 MiB) Viewed 35717 times

BonJames87
Posts: 1
Joined: 30 Aug 2017, 12:27

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by BonJames87 » 30 Aug 2017, 12:41

Hi guys i have this obd elm327 i have already eliminated 121 resistance from pin 4-16 but still there is not. Some has the same obd?
Attachments
IMG_20170829_213547.jpg
IMG_20170829_213547.jpg (3.8 MiB) Viewed 23411 times

Post Reply