FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
Alfa_147_Sele
Posts: 2
Joined: 21 Jun 2021, 03:17

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfa_147_Sele » 22 Oct 2021, 02:29

gtxstunt wrote:
29 Sep 2021, 12:37
Hello everyone!!

Could any body help with ELM 327 USB adapter ?

How i understand, for can reading i need to remove chip R04 or R14 ?

In picture below, there is elm 327 board, i bought ver 1.5, but on board sign is ver 1.0 ???

Will it work, or i need to buy another one ?

Image
Image
Image
I have the same unit and it connects to the engine and gearbox modules but no others.

I am considering correcting it but was going to remove R2 as this is the only 121 ohm resistor on the board.

studiotrenta
Posts: 1
Joined: 17 Nov 2021, 11:03

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by studiotrenta » 17 Nov 2021, 11:21

brulkjaer wrote:
02 Nov 2018, 14:27
Image

Image
This is my interface.
Witch resistor must be removed?
Hi, have you found which resistor has to be removed?

Post Reply