FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
PedroFirmino
Posts: 2
Joined: 26 Oct 2017, 10:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby PedroFirmino » 26 Oct 2017, 11:20

Olá, tenho a mesma interface do h3nriquee.
E já foi removido o resistor 2 mas não tive nenhuma comunicação com o Alfa obd
Uno motor evo IAW7GF. antes com o resistor comunicava agora não comunica. o que pode ser??
Obrigado.
Attachments
ELM 327.jpg
ELM 327.jpg (3.58 MiB) Viewed 340 times
AlexHF
Posts: 1
Joined: 28 Apr 2011, 14:07

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby AlexHF » 04 Nov 2017, 18:36

Hi there fans, I have a problem with this Chinese ELM 327 bluetooth adapter. Everywhere the test is ok, but at the end it says it can not connect. Is there a way to go, or I will need another. Thanks!
Attachments
2017-11-04+_1_.jpg
2017-11-04+_1_.jpg (213.77 KiB) Viewed 293 times
Gui6420
Posts: 1
Joined: 07 Nov 2017, 21:35

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby Gui6420 » 07 Nov 2017, 21:46

mrnixdorf wrote:hey guys,

any help with this interface i will appreciate it, i can only connect to ecu engine.

Image
Image

Thx


Hey guys,
I have the same device as the image above, and I am not able to do the proxy alignment

What vehicle? Fiat Bravo 1.4 tjet
What year? 2014
What control?
What driver was installed? Multiecuscan 3.6 or AlfaOBD

If anyone can help me!!

Thanks!
fxiat500
Posts: 8
Joined: 12 Oct 2017, 07:38

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby fxiat500 » 23 Nov 2017, 06:04

Finaly i bought an elm 327with pic 25k80 (lot of them advertise when you know you have to find it). Work fully test, error, scan and proxi alignment. It is with 64 bit windows on 2009 500c.

But I doubt multiecuscan have the convertible module option. Or this module have no proxyalignement and no way to test his function anyway ?

To find the 120ohm resistor between pin 6 and 14 well you test continuity between the pins and then resistor you suspect
xusete
Posts: 1
Joined: 28 Nov 2017, 16:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby xusete » 28 Nov 2017, 16:20

Hola!
I am trying to access to body in a alfa 147 1.6 twinspark 2004. I have an Elm327 wifi interface and can't find the famous 121ohms resistor I am supposed to remove.
Resistance between pins 6 and 14 is 50kohms (according to my multimeter).
Board is so so tiny! :?
Attachments
20171128_171348.jpg
20171128_171348.jpg (2.5 MiB) Viewed 159 times
20171128_171358.jpg
20171128_171358.jpg (2.37 MiB) Viewed 159 times
rtfw61v2
Posts: 1
Joined: 29 Nov 2017, 15:41

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby rtfw61v2 » 29 Nov 2017, 15:52

Hi guys, i have just bought this elm327 clone from aliexpress, obviously cannot works with my Alfa Romeo 147 1.6 TS 16v. There are some inscriptions on the card "A-L07AJ_M", "M160421" and "M160413". I read that it was enough to remove some resistance to make it work properly. Can someone help me?
Attachments
20171129_161439.jpg
20171129_161439.jpg (2.94 MiB) Viewed 147 times
20171129_161400.jpg
20171129_161400.jpg (3.16 MiB) Viewed 147 times
20171129_161609.jpg
20171129_161609.jpg (2.96 MiB) Viewed 147 times
PatrickH
Posts: 1
Joined: 07 Dec 2017, 01:57

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby PatrickH » 07 Dec 2017, 02:22

[attachment=0]index.jpg[/attachment]
Fiat Punto mk2
First registrated in 2000
1.2 8v ISO9141-2

Tryed Torque, AlfaOBD on Android and Car Scanner on Windowsphone. Car Scanner trows out a Warning "Bad ELM Clone" :o , Torque sticks in a loop trying to find "Model".


Someones got this one running?
Attachments
index.jpg
index.jpg (172.77 KiB) Viewed 85 times
Matevz251083
Posts: 1
Joined: 13 Dec 2017, 18:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Postby Matevz251083 » 13 Dec 2017, 18:34

Hello All I am Matevz from Slovenia, Ljubljana. I have bought this elm, it says V1.5a but no labels inside. What resistor do I remove? It connects bosch electronics in alfa 159 but then nothing so I need to remove resistor. I havent seen such elm hire.
Thank you for your help!
Attachments
elm.jpg
elm.jpg (460.31 KiB) Viewed 4 times

Return to “Usage Q&A”

Who is online

Users browsing this forum: No registered users and 2 guests