FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 31 Jul 2011, 15:30

Hello

You see the plug, but the numbering is from the OBD connector socket NOT

The number in red is correct by Mattydr67
use this and you have the correct pinout

greeting

osmangdk
Posts: 10
Joined: 27 Jul 2011, 12:52

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by osmangdk » 31 Jul 2011, 17:14

hi,everyone.
OK. Well, what do I solder the pins.
thanks.

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 31 Jul 2011, 22:51

Hello

That depends on which vehicle!
If it is an Alfa 147 and 159, you only need to pin 1, 7, 12 connect.

This interface should not apply to the Mito, Grande Punto, 500 and so on.

And note the pin numbers (red) which has given you mattydr67

Greetings Eddy

osmangdk
Posts: 10
Joined: 27 Jul 2011, 12:52

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by osmangdk » 01 Aug 2011, 06:56

thank you for everything.

Alba_Skye
Posts: 3
Joined: 29 Jul 2011, 18:47

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alba_Skye » 03 Aug 2011, 17:22

So did anyone come up with a solution to make the 'ELM327-USB V3.0' Work yet?

Soldering and removing R04 does not work with this layout?
Attachments
photo(5) (Custom).JPG
photo(5) (Custom).JPG (31.53 KiB) Viewed 7414 times
photo(4) (Custom).JPG
photo(4) (Custom).JPG (44.17 KiB) Viewed 7414 times

fewleh
Posts: 2
Joined: 18 Aug 2011, 21:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by fewleh » 18 Aug 2011, 21:04

Hi, I have just hit this problem. Just wondering if I'm missing something, tried all sorts with my cable to get it open, but I can't.. What's the procedure for getting the casing open so I can see the chipset?

Thanks in advance, really hope I can get the cable working properly.

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by alfa156sarajevo » 19 Aug 2011, 14:00

fewleh wrote:Hi, I have just hit this problem. Just wondering if I'm missing something, tried all sorts with my cable to get it open, but I can't.. What's the procedure for getting the casing open so I can see the chipset?

Thanks in advance, really hope I can get the cable working properly.
Take off the label (on the label is written ELM327 interface - Supports all OBDII protocols) and under it you will find 4 holes with 4 screws...
Just unscrew them and that is it... ;) See the photo...
Attachments
ELM 327.jpg
ELM 327.jpg (32.61 KiB) Viewed 7324 times
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

fewleh
Posts: 2
Joined: 18 Aug 2011, 21:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by fewleh » 19 Aug 2011, 15:00

EXCELLENT :) Thanks... if only I knew it was that easy, before I smashed it all up :D

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cendler » 16 Sep 2011, 05:38

Alba_Skye wrote:So did anyone come up with a solution to make the 'ELM327-USB V3.0' Work yet?

Soldering and removing R04 does not work with this layout?
I have the same problem, please help

rxsx
Posts: 2
Joined: 29 Sep 2011, 19:40
Location: Rovigo, Italy

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by rxsx » 29 Sep 2011, 20:33

Hello, I just wanted to thank you, i bought a Chinese-made ELM327 Bluetooth v1.5, had the same problem, only connected to ECU, now i desoldered R04 and all CAN systems work perfectly...
Thanks again, if it wasn't for you probably i'd have bought another interface...

Post Reply