FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
Leonardo87
Posts: 5
Joined: 25 Nov 2018, 00:26

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Leonardo87 » 25 Nov 2018, 01:14

Hi guys! Greetins from Brazil!
Here I purchased one interface with "PIC" chip. Can somebody help me, about wich resistor can I remove from my board? (I need to read the CAN, align PROXI and I cant!) Pics below... My car is one Fiat Stilo Abarth 2.4 20V 170cv. Thanks in Advance!!!


Image

Image

Image

There is! Any help will be much appreciated! Mine board got the "PIC" chip.

Thank you guys!! :) :)

Leonardo87
Posts: 5
Joined: 25 Nov 2018, 00:26

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Leonardo87 » 25 Nov 2018, 17:41

cxem wrote:
07 Aug 2018, 06:18
Your ELM327 works only with OBD-2 protocol
You need to buy ELM327 on a PIC chip
https://www.youtube.com/watch?v=TeeUCoppzJc
Despite the color, mine board got the PIC chipset and a lot of resistors... Only the number 1 removed. Dont read my Fiat Stilo CAN system...
Any help will be very very appreciated. Thanks!

:)

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Jordandc » 30 Nov 2018, 20:31

Problem with connect to grande punto Can

Its elm 327 wifi

Image

Markoo
Posts: 1
Joined: 30 Nov 2018, 22:44

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Markoo » 30 Nov 2018, 23:30

I have a problem with USB ELM327 Advanced OBD scan tool. I can not connect to my car (Fiat Stilo 1.9 Mjet). I reviewed the previous posts but I did not find the answer though someone already had the same problem as me. I can not connect my Chinese ELM327 with my car. What exactly should I do with my device? It's CH340C chip.
Image
Image

P.S.
I hope you can see the pictures.

Jordandc
Posts: 23
Joined: 09 Aug 2013, 18:20

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Jordandc » 01 Dec 2018, 15:51

Elm 327 wifi from aliexpress

Grande punto can conection problem

Image

Slasher
Posts: 1
Joined: 01 Dec 2018, 20:47

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Slasher » 01 Dec 2018, 20:51

lucapi wrote:
19 Sep 2017, 19:16
Hello everybody,
I buy from aliexpress one obd2 cable 1.5a but MES show me error to try test

Code: Select all

COMMAND: ATZ
RESPONSE: ATZ



ELM327 v1.5

>

COMMAND: ATI
RESPONSE: ATI

ELM327 v1.5

>

COMMAND: ATE0
RESPONSE: ATE0

?

>

COMMAND: ATL0
RESPONSE: ATL0

?

>

COMMAND: ATH0
RESPONSE: ATH0

?

>

COMMAND: ATSPC
RESPONSE: ATSPC

?

>

COMMAND: ATS0
RESPONSE: ATS0

?

>

COMMAND: ATCAF0
RESPONSE: ATCAF0

?

>

COMMAND: ATCFC0
RESPONSE: ATCFC0

?

>

COMMAND: ATCRA 7B0
RESPONSE: ATCRA 7B0

?

>

COMMAND: ATSH 7B0
RESPONSE: ATSH 7B0

?

>

COMMAND: ATAT1
RESPONSE: ATAT1

OK

>

COMMAND: ATST41
RESPONSE: ATST41

?

>

COMMAND: ATBI
RESPONSE: ATBI

?

>

WARNING: This interface is not compatible with ELM 327 1.3! Will not connect to any CAN module.

Image
Image



have suggestion for resolve this problem?

Do you find the resistor?
Thanks

MarcoJay
Posts: 1
Joined: 07 Jan 2019, 14:39

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by MarcoJay » 07 Jan 2019, 15:35

Ciao a tutti!!
Nel fare i complimenti a tutti coloro che attivamente aiutano con la loro esperienza in questo forum, dopo aver letto le quasi 300 pagine, vi chiedo: potete postare uno (o più) link per poter acquistare (su aliexpress o su ebay o su Amazon...) l'interfaccia funzionante al 100% con il MES ?

Grazie 1000! :P :P

s130
Posts: 575
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by s130 » 07 Jan 2019, 18:52

Sorry MacroJay I have to point you to here:

http://www.multiecuscan.net/Distributors.aspx

All of these suppliers provide 100% working solutions AND support.

You only have to look at the size of this FAULTY ELM 327 INTERFACES DE-MYSTIFIED thread to realise that sometimes it is just not worth the risk vs price Russian roulette.

However hopefully someone may be able to recommend a working alternative for you.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

SaNdMaN
Posts: 4
Joined: 09 Jan 2019, 22:17

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by SaNdMaN » 09 Jan 2019, 22:47

Hello.

I've reading a lot since I cannot use the sw on my car.
Would a 'faulty' bt adapter ONLY affect Multiecuscan?
I'm asking because I can connect to my car with other programs, such as ScanMaster-ELM on Windows and Torque on Android...

Thank you.

Robotchicken
Posts: 1
Joined: 15 Jan 2019, 20:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Robotchicken » 15 Jan 2019, 20:31

Hello folks,

I have the same problem with My OBDII reader and i'm a bit lost by all the comment.
I've bought the OBDII Wifi reader on Amazon (the Amazon top choice), it works well for reading my motor statut but i cannot access to the on board computer of my lancia delta 1.6 Mjet
someone can tell me wich transitor i need to cut please?

Image
Image

thank you very much

Post Reply