FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[Alfaeddy]

Hi Lolo85v

I cant see the numbers from the Chip
where ist the Chip MCP2551 ???

Please make a image without flash

Have an Makro Modus in your Kamera ??


Greetings Eddy

[Alfaeddy]

Hi Lolo85v

I see you have an Alfa 159


Can so you have a connection to the engine control unit
That must always work on Alfa 159
Otherwise, your error is a setting error!!

Greetings Eddy

[lolo85v]

Here were better one photo the friend the flea(chip) mcp2551i

http://i69.servimg.com/u/f69/13/77/86/13/20130416.jpg

http://i69.servimg.com/u/f69/13/77/86/13/20130417.jpg

[Alfaeddy]

Hi Lolo85v

Answer me look at my question!
Can you make a connection to the ECU?

And the board has no problem with the CAN bus

It should work without problems


Greetings Eddy

[lolo85v]

Not of connection has the ecu

[Alfaeddy]

Hi

Then I have to say it again again again
It's not the Problem with the ELM interface!!!

check
- driver
- settings
- COM port

Greetings Eddy

[lolo85v]

Hem I have to try several computer experimental plusieur I have this message has the connection ecu on the other hand I arrive has to connect me has bodysuit

I really have no luck(chance)

http://i69.servimg.com/u/f69/13/77/86/13/sans_t12.jpg

[lolo85v]

With that her(it) you to confirm me that he(it) is functional?


http://www.ebay.fr/itm/CAN-327-Interfac ... 3373ff4313

[Alfaeddy]

Hi Lolo

Yes it works Guaranteed
If software, drivers, and settings are correct

Send the dealer a greeting from me (EDDY)

But your OBD interface should also work

Greetings Eddy

[lolo85v]

Here is it is to command(order) on the other hand for my elm they it connects everything has modulates them except driving thus can being one resistances is missing?