INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

multiecuscan program usage help
AntoninoPizzonia
Posts: 4
Joined: 20 Oct 2016, 14:45

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by AntoninoPizzonia » 28 Oct 2017, 03:24

Ciao Yani ho problemi con il connettore numero 5 vorrei entrare nel setup dell'uconnect ma non me lo riconosce ti premetto che sto parlando della fiat freemont e per quanto riguarda il connettore 5 cioè il blu ho seguito passo passo le tue istruzioni puoi aiutarmi grazie

smiley1081
Posts: 1
Joined: 08 Jan 2018, 08:46

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by smiley1081 » 08 Jan 2018, 09:03

Hello,
quite new around here...

So, I need to check the ABS on my '99 Punto 1.9 JTD to see why it sometimes work and sometime it does not.

The blokes at the local FIAT shop were not able to check it, even with an official FIAT interface.

I gather that If I buy your CANtieCAR interface I do not need anything else, (except for a PC to connect), as it should autoconfigure the connection to mimic the A1 cable, am I correct?

Where may I find more in depth info on how to use it, so that I can start to study?

Then I will have to wait two week to order it...

Post Reply