INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

multiecuscan program usage help
yani
Site Admin
Posts: 1174
Joined: 06 Nov 2009, 16:40

INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by yani » 06 Sep 2010, 16:05

Hi,

I updated the supported vehicle list with interface type and modifications required to connect to each module.

http://www.multiecuscan.net/SupportedVehiclesList.aspx


Yani

s130
Posts: 550
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by s130 » 06 Sep 2010, 17:55

Great Yani

This update is most welcome as we have all seen there is quite a lot of confussion & questions out there.

May I suggest you give a little better qualification to "connection to Pin n"

i.e. I believe you mean "Pin 7 should be connected to Pin n"
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

mattydr67
Posts: 164
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by mattydr67 » 17 Sep 2010, 08:27

Yes that's right it is about pin 7 (k-line)
Good luck

LiNuXxX
Posts: 14
Joined: 07 Feb 2010, 01:01

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by LiNuXxX » 20 Sep 2010, 07:43

That's a very user freindly update.
This makes it al clearer for editing or not editing your cabble.

Is it mayby possible to link or place a foto/manual for the differend types of cable?
It's not always evident to find a message back in the forum concerning this.

PunTosse
Posts: 3
Joined: 08 Dec 2010, 08:16
Location: Denmark

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by PunTosse » 08 Dec 2010, 13:33

Yes it would be a god help with pictures, and evt. drawings. Cause it can be a pain in the b.. to understand what other mean when you are a noob. :?:

yani
Site Admin
Posts: 1174
Joined: 06 Nov 2009, 16:40

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by yani » 15 Dec 2010, 10:03

Hi,

I updated the page with supported vehicles/systems at
http://www.multiecuscan.net/SupportedVehiclesList.aspx

I added complete wiring diagrams and explanations for creating adapter cables instead of modifying your interfaces!

Yani

s130
Posts: 550
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by s130 » 15 Dec 2010, 10:47

Good job Yani

I've just carefully read all your changes. They are clear and concise and I can't see any errors.

For everybody else I would suggest when we see any more questions about modifications we direct them with a simple

"Please read"" http://multiecuscan.net/SupportedVehiclesList.aspx

I think that if the user wants to modify their actual interfaces then they will have to work out how to do this themselves based on the info in the above link. With so many different interface makes and circuit boards then it is not practical to show interface wiring modifications.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

PunTosse
Posts: 3
Joined: 08 Dec 2010, 08:16
Location: Denmark

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by PunTosse » 15 Dec 2010, 19:39

Kudos to you Yani
You have done a very good job, now even I can make a working cable. :D

Pipen
Posts: 1
Joined: 14 Jul 2011, 05:58

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by Pipen » 14 Jul 2011, 06:31

Hello,

what is the best interface to buy and use with FiaEcuScan?
My only interest is live data loging form engine ecu and to work with diesel ecus.
As i soo obdkey is the way to go?

Regards

alfa156sarajevo
Posts: 866
Joined: 12 Feb 2010, 09:03
Location: Sarajevo, Bosnia & Herzegovina
Contact:

Re: INTERFACE TYPE REQUIRED FOR EACH MODULE!!!

Post by alfa156sarajevo » 15 Jul 2011, 09:34

Pipen wrote:Hello,

what is the best interface to buy and use with FiaEcuScan?
My only interest is live data loging form engine ecu and to work with diesel ecus.
As i soo obdkey is the way to go?

Regards
Go to: http://www.multiecuscan.net/SupportedVehiclesList.aspx
There you can find your car in the list and you will see which interface or interfaces you need (one or two)! ;)

P.S. If you have enough money for OBDKEY just buy it! :)
www.alfadiagnostik.com
Diagnostic for Alfa Romeo, Fiat and Lancia cars
Repairing City Servo System - Power Steering on Fiat and Alfa cars
Airbag ECU reset - all vehicles, all cars, all brands and all models
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Post Reply