Keep getting latency issues

multiecuscan program usage help
Post Reply
JimBo
Posts: 2
Joined: 11 Jun 2010, 12:33

Keep getting latency issues

Post by JimBo » 11 Jun 2010, 12:36

Everything is working, except for the fact that I keep getting latency issues which cause the connection to be disconnected. I´ve followed the instructions on the how to page and lowered the latency to ´1´. I could really do with some help here.

EnIgMa
Posts: 301
Joined: 23 Mar 2010, 21:52
Location: Italy

Re: Keep getting latency issues

Post by EnIgMa » 13 Jun 2010, 21:36

if you are using the elm device you should keep latecy value as default...

JimBo
Posts: 2
Joined: 11 Jun 2010, 12:33

Re: Keep getting latency issues

Post by JimBo » 15 Jun 2010, 17:13

I´m using a so called OBD cable. The advice was to put the latency value of the USB port as low as possible (´1´). Which it is now on, but it still gives latency issues.

Any advice?

Post Reply