multiecuscan program usage help
-
skylight75
- Posts: 10
- Joined: 15 Dec 2010, 14:35
Post
by skylight75 » 15 Dec 2010, 14:42
Hi all
I have a problem connecting to my ALFA 156 JTD '99
i am using both interface KKL and ELM 327 1.4
with both i can not connect to the ECU
i got the error as you can see in attached image
![Image](http://img703.imageshack.us/img703/5291/001zbh.jpg)
-
alpha
- Posts: 22
- Joined: 06 Jan 2011, 17:25
Post
by alpha » 06 Jan 2011, 17:30
I have the same problem
Connects to Airbag and ABS ECU's ok
but no engine ECU
I have notice the latency high warning in the bottom left of FES
All settings have been made as recommended at the website
-
yani
- Site Admin
- Posts: 1175
- Joined: 06 Nov 2009, 16:40
Post
by yani » 06 Jan 2011, 18:04
@skylight75 proably has to select engine "Bosch EDC15 Diesel Injection (2.4)" which is for "ALFA 156 2.4 JTD"....
It is different than "156 '02 2.4 JTD 10V".
-
alpha
- Posts: 22
- Joined: 06 Jan 2011, 17:25
Post
by alpha » 06 Jan 2011, 21:34
Hi Yani
Any ideas on my problem ?
As i said ok to connect to Airbag and ABS but not the ECU
Happy New Year
![Smile :)](./images/smilies/icon_e_smile.gif)
-
YorT
- Posts: 1
- Joined: 10 Jan 2011, 04:26
Post
by YorT » 10 Jan 2011, 04:30
alpha wrote:Hi Yani
Any ideas on my problem ?
As i said ok to connect to Airbag and ABS but not the ECU
Happy New Year
![Smile :)](./images/smilies/icon_e_smile.gif)
I have the same problem connecting to 147 TS 2.0, After I scan, it lets me get body, CAN and other stuff, but ABS or ECU do not appear in the scan list and as a result gives me an error message that I am unable to connect.
-
alpha
- Posts: 22
- Joined: 06 Jan 2011, 17:25
Post
by alpha » 10 Jan 2011, 15:09
Select your vehicle
Hit connect
And thats it it should work.
See my post regarding the driver issue.
viewtopic.php?f=5&t=1816