Cannot connect to landi ecu

multiecuscan program usage help
Post Reply
Bsks
Posts: 3
Joined: 22 Sep 2023, 18:59

Cannot connect to landi ecu

Post by Bsks » 22 Sep 2023, 19:08

Hello,

Just purchased a license key for the software. My goal was to connect to the landi renzo ecu and adjust the gas pressure on my 2008 fiat bravo. It says In the supported vehicles list, that the lpg ecu is accessible with elm device on the registered version. I am using ELM327 Bluetooth.

In the attached picture is the error I'm getting. Any help is greatly appreciated 👍

https://ibb.co/82VTX7b
Last edited by Bsks on 23 Sep 2023, 12:54, edited 1 time in total.

Bsks
Posts: 3
Joined: 22 Sep 2023, 18:59

Re: Cannot connect to landi ecu

Post by Bsks » 23 Sep 2023, 09:26

Sorry, here is the pic
https://ibb.co/82VTX7b

abarthmultijet
Posts: 138
Joined: 17 Feb 2021, 22:37
Location: Oss, Netherlands

Re: Cannot connect to landi ecu

Post by abarthmultijet » 12 Oct 2023, 20:52

Is it an LPG system fitted at the factory? Not an added one?

I always use an Cantiecar with a multiplexed version of MES, never had any problems with connections
Abarth Punto Evo, Fiat Doblo 263 1.4 t-jet, Audi S4 B8.5, 1.3 Multijet specialist, Uconnect 7 specialist,

Bsks
Posts: 3
Joined: 22 Sep 2023, 18:59

Re: Cannot connect to landi ecu

Post by Bsks » 26 Oct 2023, 09:33

I think its factory installed. Anyways, got me a landi cable for the job

Post Reply