Ducato (type 250) Facelift

Post multiecuscan feature requests
Post Reply
ducgh
Posts: 3
Joined: 03 Feb 2022, 18:42

Ducato (type 250) Facelift

Post by ducgh » 10 Feb 2022, 18:18

Hi,
I have the following question:
In the list of the SUPPORTED VEHICLES/SYSTEMS I can see, that for the Fiat
Ducato (type 250) Facelift the Tire Pressure Control (TPMS) Schrader (2/3 axle) is not supported.
Is there a chance that this feature will be implemented in the next Version of the “Multiecuscan” program?
The Version 4.8 I have already bought.

Gerd

ducgh
Posts: 3
Joined: 03 Feb 2022, 18:42

Re: Ducato (type 250) Facelift

Post by ducgh » 14 May 2022, 12:47

Unfortunately, the Ducato Facelift was not included in version 4.8 of Multiecusan.

chrener
Posts: 175
Joined: 07 Jun 2018, 13:08
Location: Košice, Slovakia
Contact:

Re: Ducato (type 250) Facelift

Post by chrener » 16 May 2022, 11:20

Hi!
In MES is 3 versions of Ducato
1 - X250 2006-2009 with white BCM - without adapters
2 - X250FL (means facelift) 2010-2014 same body as X250 but with black BCM - with yellow adapter
3 - X290 body facelift 2014+ with black BCM - with yellow adapter

Newest ducato8 or X295 2021+ is unsupported yet but you can connect to BCM as Fiat TIPO... Proxialignment procedure is on your own risk...
Jeep Renegade 1.4 MultiAir TURBO 75th Anniversary

ducgh
Posts: 3
Joined: 03 Feb 2022, 18:42

Re: Ducato (type 250) Facelift

Post by ducgh » 17 May 2022, 08:25

Hallo Chrener, many thanks for your hint.
But with my equipment I can’t access to Tipo. I have MES 4.9, EML 327 Interface and the yellow adapter.
Furthermore I wanted to change the value in the Tire Pressure Control and in the list of supported vehicles in non Tipo with a Tire Pressure Control.

nirvananils
Posts: 4
Joined: 18 Jun 2021, 11:03

Re: Ducato (type 250) Facelift

Post by nirvananils » 15 Aug 2022, 11:30

I have actually same problem, with MES 4.9 and CANtieCar don't have access to a Ducato (with Pössl Caravan) ECU's.
On our Fiat 500e (California) everything is working fine

Post Reply