Page 1 of 1
Gearbox change
Posted: 24 Feb 2021, 09:33
by abuk8
Hello, I have a problem with my cruisecontroll. Previous owner swap the gearbox (Grande Punto 1.9 120HP) from the 130HP engine. And because of this i cant use my cruise controll. It would be great to have the possibilities to change gear ratio or gearbox. Thanks.
Re: Gearbox change
Posted: 24 Feb 2021, 15:08
by shpuncik
this is beyond MES scope. you need to make changes in engine ecu software for right gear ratios. find who specialize in engine tuning - they should be able to sort this out.
Re: Gearbox change
Posted: 21 Feb 2022, 21:57
by abuk8
shpuncik wrote: ↑24 Feb 2021, 15:08
this is beyond MES scope. you need to make changes in engine ecu software for right gear ratios. find who specialize in engine tuning - they should be able to sort this out.
I found in 4.8 MES in proxy alignment posibilitty of gearbox cahange there is manual, selspeed, ddct, automatic and then type 5,6..etc. Do you think that this could be solution?
Re: Gearbox change
Posted: 23 Feb 2022, 16:59
by abarthmultijet
I think it could be a solution, first save the proxy code (control-alt-C when in the proxy allignment tab) to windows notepad. Then try the different gearbox type's.
Re: Gearbox change
Posted: 07 Mar 2022, 19:42
by chrener
You need to change "final Ratio"
Re: Gearbox change
Posted: 31 Mar 2022, 21:01
by Jo_Neu
Hi, i have the same Problem with Ducato Multijet 180 from 2013.......
How can i change the points of Gearbox??
Thx
Re: Gearbox change
Posted: 01 Apr 2022, 18:10
by Jo_Neu
abuk8 wrote: ↑21 Feb 2022, 21:57
shpuncik wrote: ↑24 Feb 2021, 15:08
this is beyond MES scope. you need to make changes in engine ecu software for right gear ratios. find who specialize in engine tuning - they should be able to sort this out.
I found in 4.8 MES in proxy alignment posibilitty of gearbox cahange there is manual, selspeed, ddct, automatic and then type 5,6..etc. Do you think that this could be solution?
Hi, do you have tested it?
This will be very interest
Re: Gearbox change
Posted: 19 Mar 2023, 21:15
by abuk8
Jo_Neu wrote: ↑01 Apr 2022, 18:10
abuk8 wrote: ↑21 Feb 2022, 21:57
shpuncik wrote: ↑24 Feb 2021, 15:08
this is beyond MES scope. you need to make changes in engine ecu software for right gear ratios. find who specialize in engine tuning - they should be able to sort this out.
I found in 4.8 MES in proxy alignment posibilitty of gearbox cahange there is manual, selspeed, ddct, automatic and then type 5,6..etc. Do you think that this could be solution?
Hi, do you have tested it?
This will be very interest
No i try just free version. I dont want to destroy it
-
Posted: 03 Mar 2024, 00:40
by BBOinsam
Thanks but I kinda dont know how to change that. I was looking through all the skins in bitmap and couldnt find anything. I might have to add my own?