Page 1 of 1

Solved: Uconnect retrofit

Posted: 08 Nov 2019, 08:49
by eefo88
Hi Folks!

I have a Fiat 500 from 2016 with a retrofitted 7" Uconnect device.

I've in the BCM code: B10AA-4A Proxy configuration
And in ETM: B222C Configuration

As expected i can't do the alignment cause of the wrong proxi settings.

Does anyone know where i need to change the proxi?

33 32 31 35 30 30 32 34 33 38 37 4F 55 54 50 55 54 44 4A 49 54 20 16 12 01 4F 80 00 04 10 00 00 00 09 00 00 04 10 00 00 00 83 C2 73 06 F4 00 1C C0 00 00 00 16 00 01 00 94 06 01 01 00 40 00 81 20 75 41 0A 0C 0D 01 80 2E 24 00 00 00 00 31 05 61 03 08 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8C 00 94 08 52 00 04 88 02 00 20 80 00 00 44 00 97 00 0F 00 00 00 00 01 00 C0 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00


Is the custom proxy

Thanks in advance!

Re: Uconnect retrofit

Posted: 11 Nov 2019, 10:53
by eefo88
The problem is solved.

Solution:

My Proxy had a lenght of 157 bytes if you change byte length to 193 bytes the proxy alignment will be succesful. Just add 00 til you reach 193 bytes.

Byte 115= 02
Byte 121= 40 Navi
Byte 121= 44 Navi+Audio
Byte 123= D5 Dab
Byte 130= 01 Fiat logo
Byte 130= 05 Abarth logo
Byte 148= 05 Uconnect 7

Carplay, Android:

Byte 157= 01 CarPlay
Byte 158= 00
Byte 159= 00
Byte 160= 01 Android Auto

Re: Uconnect retrofit

Posted: 20 Dec 2019, 12:37
by Yugiro
eefo88 wrote:
11 Nov 2019, 10:53
The problem is solved.

Solution:

My Proxy had a lenght of 157 bytes if you change byte length to 193 bytes the proxy alignment will be succesful. Just add 00 til you reach 193 bytes.

Byte 115= 02
Byte 121= 40 Navi
Byte 121= 44 Navi+Audio
Byte 123= D5 Dab
Byte 130= 01 Fiat logo
Byte 130= 05 Abarth logo
Byte 148= 05 Uconnect 7

Carplay, Android:

Byte 157= 01 CarPlay
Byte 158= 00
Byte 159= 00
Byte 160= 01 Android Auto
Hello
how do I do abarth instead of opening logo fiat my car fiat tipo