Page 1 of 1

EDC16C39 CF5 Injection time and advance

Posted: 10 Aug 2019, 09:03
by janyboy
Hello, could it be possible to have the ability to log/see live data for injection time (ms) and injection advance (deg) for EDC16C39 CF5 (Alfa 159 2.0JTDm, Alfa Brera 2.0JTDm, Alfa Spider 2.0JTDm, Lancia Delta 2.0JTDm, Fiat Bravo 2.0JTDm, Fiat Sedici 2.0JTDm)? It is available for all EDC16C39 CF4 and even for some EDC16C39 CF5 like Fiat Doblo 2.0JTDm, Alfa Giulietta 2.0JTDm . Will be very nice to have this feature on EDC16C39 CF5 engines (the ones i have pointed above) as well so if it is not a big issue to implement it please do. Thanks.


Regards
Jany

Re: EDC16C39 CF5 Injection time and advance

Posted: 11 May 2020, 16:13
by janyboy
I did not see that there was already a similar topic on the forum "EDC16+C39 ECU's features" http://forum.multiecuscan.net/viewtopic.php?f=4&t=2712
Apologize about that.
Just out of curiosity: is there any technical reason for all CF5 EDC16C36 K-line based ECUs not to have live/log data for injection related parameters (pre, main, post injection time, advance and so on)? CF5 EDC16C36 CAN-based ECUs do have them. Even CF4 EDC16C36 K-line based ECUs do have them (obviously after being requested in the old topic i mentioned).