Enable TCT steering wheels paddles

Post multiecuscan feature requests
Post Reply
federicoco
Posts: 2
Joined: 31 Jan 2017, 21:23

Enable TCT steering wheels paddles

Post by federicoco » 31 Jan 2017, 21:33

I bought a MY2014 steering wheel with TCT Paddle
All radio and blue&me works fine but paddle dons't work

is possible to enable this feature? which kind of steering wheel i need to set? 10 commands instead of 8?

thank you

Federico

thembalu
Posts: 2
Joined: 06 Feb 2017, 18:23

Re: Enable TCT steering wheels paddles

Post by thembalu » 06 Feb 2017, 18:27

Hi,
I am also interested.

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Enable TCT steering wheels paddles

Post by yani » 17 Feb 2017, 08:13

What make/model/year is the car?

thembalu
Posts: 2
Joined: 06 Feb 2017, 18:23

Re: Enable TCT steering wheels paddles

Post by thembalu » 18 Feb 2017, 11:35

Hallo

Giulietta, 2011. 2.0jtdm, tct

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Enable TCT steering wheels paddles

Post by yani » 19 Feb 2017, 12:26

You can try the following:
1. Connect to your car with CAN Setup/PROXI Alignment and go to Adjustments
2. press ctrl+alt+c from the keyboard- Multiecuscan will open a window with title “Custom PROXI”
3. change byte 80 as follows:
-if it is 00 then change it to 20
-if it is 01 then change it to 21
-if it is 03 then change it to 23
-if it is 10 then change it to 30
-if it is 11 then change it to 31
-if it is 13 then change it to 33
BE VERY CAREFUL NOT TO CHANGE OR DELETE ANYTHING ELSE!!!
4. Click OK
5. Execute PROXI ALIGNMENT PROCEDURE
6. Switch OFF the car and wait 1 minute.
Re-start the car and check if paddles are activated…

Post Reply