Adding type of interface and pin number

Post multiecuscan feature requests
Post Reply
Bo.rys
Posts: 1
Joined: 05 Apr 2016, 20:01

Adding type of interface and pin number

Post by Bo.rys » 05 Apr 2016, 20:20

Hello,

it is possible to add to existing pup up window type of interface and which pin, pins to connect to?
e.g Connect ELM
e.g Connect ELM pins 6 and 14 to 1 and 9
e.g Connect KL pin 7 to 9

Regards

Post Reply