Steering wheel and automatic trans AR159 1,9JTDm

Post multiecuscan feature requests
cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 19 Jun 2014, 20:59

To activate the buttons on the steering wheel for the automatic transmission + and - how to do it?
Everything is connected and does not work well, what else must be done?

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 03 Jul 2014, 07:10

no one knows

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by alfa156sarajevo » 07 Aug 2014, 21:56

It is very easy.
Go to "CAN setup/ Proxy procedure" > then to "F7 Settings" > then to "Steering wheel buttons" > then select "F10 Execute > then select "Enable" > then "OK" > Then do the "PROXY procedure".
That is all!
I do not have time to put photos of all detail procedure...
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 08 Aug 2014, 13:32

alfa156sarajevo wrote:It is very easy.
Go to "CAN setup/ Proxy procedure" > then to "F7 Settings" > then to "Steering wheel buttons" > then select "F10 Execute > then select "Enable" > then "OK" > Then do the "PROXY procedure".
That is all!
I do not have time to put photos of all detail procedure...
I of course tried, but it did not work. There is a choice of this, I tried to type B, 8 buttons; type C; type D / 159; type F; type E, 10 keys, of course, I gave each of the proximal delimitation and it does not work and what to do.
Attachments
whells.JPG
whells.JPG (102.97 KiB) Viewed 7310 times

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 08 Aug 2014, 16:57

sorry english
Attachments
whells.JPG
whells.JPG (107.41 KiB) Viewed 7307 times

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by alfa156sarajevo » 08 Aug 2014, 19:26

If you done Proxy procedure after the selecting the type then it should work.

I tried it once on Stilo and did worked! I did nor tried on Alfa 159. Did not had the chance...
Procedure is obviously the same just in case with 159 does not work.
Or it is a bug in MES or 159 are made a little bit complicated.

I know that with man had problems installing cruise control on 159 mjet.
At the end he reprogrammed with additional programmer the body electronic and cruise control did worked. :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 09 Aug 2014, 06:21

Proxy alignment every time and I did not really

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by yani » 09 Aug 2014, 07:00

The "Steering wheel buttons" function in PROXI settings is for the Radio/Blue&Me controls on the steering wheel.
It does not control the gearbox paddles on steering wheel.

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by alfa156sarajevo » 30 Aug 2014, 10:45

Yani you are right.
I did not understand the question very well.
I understand that he changed steering wheel from normal one with the other one with buttons...
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

cendler
Posts: 21
Joined: 13 Sep 2010, 05:44

Re: Steering wheel and automatic trans AR159 1,9JTDm

Post by cendler » 30 Aug 2014, 19:54

hmm, but it still does not solve my problem

Post Reply