Support for Fiat Grande Punto 1.9mjet 130cv & deal

Post multiecuscan feature requests
Post Reply
mr.xkr
Posts: 2
Joined: 17 Nov 2009, 14:53

Support for Fiat Grande Punto 1.9mjet 130cv & deal

Post by mr.xkr » 17 Nov 2009, 15:01

yani, I've just said this program a frew minutes ago, and I've not tested it in my car: Fiat Grande Punto 1.9mjet 130cv

Will you support this model in the future?

I will be very happy if you do this, because I'm from http://www.solocarputer.com, a mp3car-style spanish forum and I'm developing some CarPC software: http://www.inertinc.org/inav3/

Your software looks very good, so I want to test it on my car, and if it works, I will try to integrate it in the software.

If you want, we can have a deal: I offer you hosting for your project, and you help me researching OBD in my car ;)

Thanks in advance.

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Support for Fiat Grande Punto 1.9mjet 130cv & deal

Post by yani » 17 Nov 2009, 18:19

Hi mr.skr,

yes, I will add support for EDC16... It just takes time.
I have two JTD cars, so I'm adding supported modules of my cars first. Then I will go with EDC16 and petrol engines.

mr.xkr
Posts: 2
Joined: 17 Nov 2009, 14:53

Re: Support for Fiat Grande Punto 1.9mjet 130cv & deal

Post by mr.xkr » 19 Nov 2009, 07:18

yani wrote:Hi mr.skr,

yes, I will add support for EDC16... It just takes time.
I have two JTD cars, so I'm adding supported modules of my cars first. Then I will go with EDC16 and petrol engines.
Thanks yani. It's logic you support your cars first, so do I with some applications I do, it's logic.

I will be waiting for EDC16 support :)

Thanks again.

Post Reply