activate rear cam fiat 500e 2016 uconnect 7

Post multiecuscan feature requests
Post Reply
Sporting500e
Posts: 7
Joined: 05 Jun 2021, 17:47

activate rear cam fiat 500e 2016 uconnect 7

Post by Sporting500e » 25 Oct 2021, 12:06

hello

i have a 2016 fiat 500e and installed a uconnect 7 its a brand new one build year 2020 with dab navi carplay i did the proxy and its working fine no blinking odo but now we want to ad a rear camera to the uconnect 7 i installed pin 31 and pin 32 connector back of the uconnect 7 with the video signal cable but which byte need to be changed so it will work .??

Also like to ad cornering lights when you take a corner youre fogg light comes on which byte for that ?

thanks :)

chrener
Posts: 29
Joined: 07 Jun 2018, 13:08

Re: activate rear cam fiat 500e 2016 uconnect 7

Post by chrener » 28 Oct 2021, 07:37

Byte 51 = 20 is RVC enable
But you have to check the RVC support in engineering menu of your uConnect7...
Some units dont have RVC HW inside... Than cant display a video...
Good luck!

Sporting500e
Posts: 7
Joined: 05 Jun 2021, 17:47

Re: activate rear cam fiat 500e 2016 uconnect 7

Post by Sporting500e » 28 Oct 2021, 09:33

When i am in enginering modus in the uconnect 7 the EngMenu9Pdx it says rvc not enabled when i replace byte 51 from 00 to 20 but i think that the proxy is failing with multiecuscan .

is it only change byte 51 or another byte must be also replaced ?

shpuncik
Posts: 149
Joined: 19 Oct 2018, 16:43

Re: activate rear cam fiat 500e 2016 uconnect 7

Post by shpuncik » 29 Oct 2021, 12:53

post your failed proxi log

Sporting500e
Posts: 7
Joined: 05 Jun 2021, 17:47

Re: activate rear cam fiat 500e 2016 uconnect 7

Post by Sporting500e » 03 Jan 2022, 15:53

In engmenu it says like hw not present coding not present
But in proxy it changes to bite 20 and i have now a good aligment but if i reverse mine uconnect is not showing a screen for backup cam

Sporting500e
Posts: 7
Joined: 05 Jun 2021, 17:47

Re: activate rear cam fiat 500e 2016 uconnect 7

Post by Sporting500e » 14 Jan 2022, 13:07

Here is mine proxy data from the uconnect 7

31 36 31 32 31 31 30 37 39 30 30 31 32 33 34 35 36 37 38 39 30 20 16
06 01 4D 84 40 05 13 00 02 00 09 00 00 00 13 00 00 00 80 D0 4D 06 F4
00 01 70 0A 20 00 47 00 09 00 94 00 00 04 00 01 A0 10 00 00 00 00 00
00 00 00 00 27 00 00 00 00 35 06 C1 01 00 00 A0 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 8C 00 90 18 52 30 00 D0 02
00 30 00 00 00 44 00 D5 00 00 00 00 00 00 05 00 A0 01 00 00 00 00 00
00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 01 00 00 01 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00

Post Reply