Multiecuscan

hello can't do alligment, it fail at DASM ecu. Sure some byte to change in custom proxy.
Follow FESLog . Who can help me? Other retrofit ecu is working fine and i can log in into DASM and read my VIN and other setting. Please Help me.

Lettura dati configurazione CAN...
CAN CONFIGURATION DATA:
4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 44 0C 00 60 10 00 00 02 02 08 00 00 80 00 00 00 00 00 00 40 10 00 00 02 00 00 00 00 00 00 00 00
4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 4B 0C 00 65 10 00 19 02 02 00 00 00 80 00 00 00 4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 4B 0C 00 65 10 00 19 02 02 00 00 00 80 00 00 00 4B 0C 00 65 10 00 19 00 02 00 00 00 80 00 00 00
30 34 36 32 30 30 33 37 30 33 39 4F 55 54 50 55 54 2D 53 49 54 20 16 07 13 4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 4B 0C 00 65 10 00 19 02 02 00 00 00 80 00 00 00 43 DD 2F 02 A9 A3 08 6D 74 2B A1 07 48 10 10 0A AB 28 0E FA C0 35 73 14 01 4F 03 34 9D 03 CC 24 03 23 05 00 A0 00 0A 3C 00 00 18 04 00 91 00 5B FA 64 07 ED 05 31 02 01 70 15 3D 89 14 39 00 CF 00 93 18 16 A4 3D 49 00 E3 12 FD 57 80 00 00 B8 FF 3C F0 50 08 30 91 08 20 00 33 00 00 0A 14 00 00 02 00 17 00 C0 00 03 40 18 00 01 13 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Body Computer (BCM/NBC)
Controllo motore (ECM/NCM)
Quadro Strumenti (IPC/NQS)
Cambio Automatico/Robotiz. (TCM/NCA/NCR)
Nodo Selettore Cambio (ESM/GSM/NSC)
Driver Assistant System Node (DASM)
Radio Frequency Hub Node (RFHM)
Climatizzatore (HVAC/NCL)
Entertainment Telematic Node (ETM)
Comfort Seat and Wheel Node (CSWM)
Left Blind Spot Sensor Node (LBSS)
Right Blind Spot Sensor Node (RBSS)
Entertainment multimedia control module (EMCM)
Guida Elettrica (EPS/NGE)
Impianto frenante (ABS/BSM/NFR)
Nodo Sensore Parcheggio (PAM/NSP)
Nodo Air Bag (NAB/ORC)
Nodo Fari Autoadattativi (AFLS/NFA)
Nodo Controllo Corsia (HALF)
(Multiecuscan 5.1)
09/09/2023 08:33:55
Alfa Romeo Giulia 2.2 MultiJet 16V
CAN Setup / PROXI Alignment Procedure (952)
--------------------------------------------------------------

Body Computer (BCM/NBC): EOL Ok
Controllo motore (ECM/NCM): EOL Ok
Quadro Strumenti (IPC/NQS): EOL Ok
Cambio Automatico/Robotiz. (TCM/NCA/NCR): EOL Ok
Nodo Selettore Cambio (ESM/GSM/NSC): Ok
Driver Assistant System Node (DASM): EOL Fallito
Radio Frequency Hub Node (RFHM): EOL Ok
Climatizzatore (HVAC/NCL): EOL Ok
Entertainment Telematic Node (ETM): EOL Ok
Comfort Seat and Wheel Node (CSWM): EOL Ok
Left Blind Spot Sensor Node (LBSS): EOL Ok
Right Blind Spot Sensor Node (RBSS): EOL Ok
Entertainment multimedia control module (EMCM): EOL Ok
Guida Elettrica (EPS/NGE): Ok
Impianto frenante (ABS/BSM/NFR): EOL Ok
Nodo Sensore Parcheggio (PAM/NSP): EOL Ok
Nodo Air Bag (NAB/ORC): EOL Ok
Nodo Fari Autoadattativi (AFLS/NFA): EOL Ok
Nodo Controllo Corsia (HALF): EOL Ok

CUSTOM PROXI NEW DATA:
30 34 36 32 30 30 33 38 35 38 32 4F 55 54 50 55 54 2D 53 49 54 20 16 07 13 4F 0C 40 65 10 00 19 02 02 08 00 00 80 00 00 00 4B 0C 00 65 10 00 19 02 02 00 00 00 80 00 00 00 43 DD 2F 02 A9 A3 08 6D 74 2B A1 07 48 10 10 0A AB 28 0E FA C0 35 73 14 01 4F 03 34 9D 03 CC 24 03 23 05 00 A0 00 0A 3C 00 00 18 04 00 91 00 5B FA 64 07 ED 05 31 02 01 70 15 3D 89 14 39 00 CF 00 93 18 16 A4 3D 49 00 E3 12 FD 57 80 00 00 B8 FF 3C F0 50 08 30 91 08 20 00 33 00 00 0A 14 00 00 02 00 17 00 C0 00 03 40 18 00 01 13 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ESECUZIONE ADEGUAMENTO...
PROCEDURA ALLINEAMENTO PROXI
Scrittura dati configurazione CAN...
Registrazione modulo: Body Computer (BCM/NBC) ESEGUITO!
Registrazione modulo: Controllo motore (ECM/NCM) ESEGUITO!
Registrazione modulo: Quadro Strumenti (IPC/NQS) ESEGUITO!
Registrazione modulo: Cambio Automatico/Robotiz. (TCM/NCA/NCR) ESEGUITO!
Registrazione modulo: Driver Assistant System Node (DASM) FALLITO! - Errore sconosciuto
[102A] errors: Byte 1: 30->CF
Registrazione modulo: Radio Frequency Hub Node (RFHM) ESEGUITO!
Registrazione modulo: Climatizzatore (HVAC/NCL) ESEGUITO!
Registrazione modulo: Entertainment Telematic Node (ETM) ESEGUITO!
Registrazione modulo: Comfort Seat and Wheel Node (CSWM) ESEGUITO!
Registrazione modulo: Left Blind Spot Sensor Node (LBSS) ESEGUITO!
Registrazione modulo: Right Blind Spot Sensor Node (RBSS) ESEGUITO!
Registrazione modulo: Entertainment multimedia control module (EMCM) ESEGUITO!
Registrazione modulo: Impianto frenante (ABS/BSM/NFR) ESEGUITO!
Registrazione modulo: Nodo Sensore Parcheggio (PAM/NSP) ESEGUITO!
Registrazione modulo: Nodo Air Bag (NAB/ORC) ESEGUITO!
Registrazione modulo: Nodo Fari Autoadattativi (AFLS/NFA) ESEGUITO!
Registrazione modulo: Nodo Controllo Corsia (HALF) ESEGUITO!
ESECUZIONE FALLITA
Driver Assistant System Node (DASM) FALLITO! - Errore sconosciuto

Hi!
What did you do with DASM unit? Or what did you set in proxi?
Was the DASM unit brand new or virginized? Or just used one?

After retrofitted body and many other ecu have changed DASM too( FCW radar), all working with old radar but i want to put new radar and it fail in aligment, really strange. It was new and contain my VIN number and calibrated succesfully with brainbee ad mirror procedure. I think some byte to change in proxy but i don't know which byte to customize. Or just a MES 5.1 bug dialogue? I can login in dasm and comunicate with it