DRL settings for freemont failure on 3.6

Report any bugs found in multiecuscan
sppmaster
Posts: 16
Joined: 27 Jun 2017, 10:03

Re: DRL settings for freemont failure on 3.6

Post by sppmaster » 27 Jun 2017, 10:39

sdmaino wrote:Jumped from 3.4 to 3.6 and DRL settings for fremont are not working anymore.
Reverting back to 3.4 and all works OK.
Still did not test 3.5
Thank you for fixing
Please tell me which version works. A service technician tried to activate the DRL with v3.6 on Freemont with Uconnect 4.3, FWD with manual transmission. He couldn't activate it because some kind of error popped up. He said he wasn't sure that this configuration is supported. Does anyone know or was able to activate the DRL on Freemont with Uconnect 4.3, FWD with manual transmission.

haffonso
Posts: 33
Joined: 20 Jun 2017, 22:37

Re: DRL settings for freemont failure on 3.6

Post by haffonso » 27 Jun 2017, 10:56

It worked for me and i could enable and the settings are : DRL enabled / Canada / High Beam / 6,8v
I don't know the difference between Europe 1/2/3 seems to be UK / W. Europe / E. Europe

sppmaster
Posts: 16
Joined: 27 Jun 2017, 10:03

Re: DRL settings for freemont failure on 3.6

Post by sppmaster » 27 Jun 2017, 11:04

haffonso wrote:It worked for me and i could enable and the settings are : DRL enabled / Canada / High Beam / 6,8v
I don't know the difference between Europe 1/2/3 seems to be UK / W. Europe / E. Europe
Do you have 4.3 (small screen) or 8.4 (big screen) Uconnect? Manual/Auto and FWD/AWD?

haffonso
Posts: 33
Joined: 20 Jun 2017, 22:37

Re: DRL settings for freemont failure on 3.6

Post by haffonso » 02 Jul 2017, 01:05

i have uconnect 8.4.. but there s nothing to do with uconnect.. this is the bcm module..
go to body module and adjustments.. the scanner should be multiplexed or with the connector mentioned in multiscanner site

haffonso
Posts: 33
Joined: 20 Jun 2017, 22:37

Re: DRL settings for freemont failure on 3.6

Post by haffonso » 02 Jul 2017, 19:14

no issues at all..
To configure DRL using the uconnect settings

Drl enabled
Drl Settings Europe 3 and not Canada... unless your country requires the headlights on all the time

voltage.. 7.0v but you can see the most convenient which is 24% of power consumption. you can see it in parameters in multiscanner..

haffonso
Posts: 33
Joined: 20 Jun 2017, 22:37

Re: DRL settings for freemont failure on 3.6

Post by haffonso » 02 Jul 2017, 21:10

find the screen whre the drl should be configured
for Canada choose Canada.. if wish to control from uconnect use Europe 3.
Attachments
IMG-20170702-WA0003.jpeg
IMG-20170702-WA0003.jpeg (1.47 MiB) Viewed 4389 times

sppmaster
Posts: 16
Joined: 27 Jun 2017, 10:03

Re: DRL settings for freemont failure on 3.6

Post by sppmaster » 02 Jul 2017, 21:54

Thanks a lot for the information. Can you take a picture of the Uconnect menu and settings when Europe3 is enabled.

haffonso
Posts: 33
Joined: 20 Jun 2017, 22:37

Re: DRL settings for freemont failure on 3.6

Post by haffonso » 02 Jul 2017, 21:58


sppmaster
Posts: 16
Joined: 27 Jun 2017, 10:03

Re: DRL settings for freemont failure on 3.6

Post by sppmaster » 02 Jul 2017, 22:09

Just wonder how it is going to look on 4.3 screen.

sppmaster
Posts: 16
Joined: 27 Jun 2017, 10:03

Re: DRL settings for freemont failure on 3.6

Post by sppmaster » 06 Jul 2017, 23:44

haffonso wrote:find the screen whre the drl should be configured
for Canada choose Canada.. if wish to control from uconnect use Europe 3.
If you choose Europe 3 where in the Uconnect menu the setting to control DRL shows up.

I've just activated the DRL with latest v3.7.

Post Reply