3.1 update BCM issues

Report any bugs found in multiecuscan
Post Reply
Gavra
Posts: 5
Joined: 21 Nov 2010, 08:59

3.1 update BCM issues

Post by Gavra » 01 Jul 2016, 05:54

Hi, since latest update 3.1 was released my MES can't connect to BCM, electric steering and any other module for diagnostic. Engine is easy accessible and CAN proxy alignment can be done. But connection to BCM can't be established anymore. VCI in use ELM327 V1.4 and AVDI genuine.......

Same ELM works correctly on all CAN in FORD/MAZDA vehicles.

Any suggestions?

I did send reports directly from MES several times after errors with BCM connection.

Post Reply