"Undefined error" while programming remote on new Bravo

Report any bugs found in multiecuscan
Post Reply
role77
Posts: 2
Joined: 20 Oct 2015, 08:52

"Undefined error" while programming remote on new Bravo

Post by role77 » 20 Oct 2015, 08:57

I get this message right after entering security code. Latest registered version (2.7) of Multiecuscan. Everything else works fine. Any ideas?
I tried it with older version but same result. Another try, and i got message: " Failed to execute, Security access failed " :shock: ???
Last edited by role77 on 27 Oct 2015, 13:25, edited 1 time in total.

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: "Undefined error" while programming remote on new Bravo

Post by alfa156sarajevo » 23 Oct 2015, 20:44

Strange... :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

lala166
Posts: 2
Joined: 12 Feb 2016, 20:17

Re: "Undefined error" while programming remote on new Bravo

Post by lala166 » 12 Feb 2016, 20:26

Same problem.
Mes 2.5 registered.

nemena
Posts: 1
Joined: 30 Oct 2016, 09:32

Re: "Undefined error" while programming remote on new Bravo

Post by nemena » 30 Oct 2016, 09:35

Same problem, MES 3.3 registered. Is there a solution for that?

galilioo
Posts: 1
Joined: 12 Feb 2016, 23:19

Re: "Undefined error" while programming remote on new Bravo

Post by galilioo » 10 Dec 2016, 21:25

i have the same problem, error shows instantly after entering the security code
Bravo 2009 - MES 3.3 registered version - elm327 usb cable

rob3358
Posts: 8
Joined: 13 Nov 2015, 15:22

Re: "Undefined error" while programming remote on new Bravo

Post by rob3358 » 06 Sep 2017, 16:09

I know this is an old post, but just wondered if there was a solution to this problem, as had the same error while attempting to programm remote on brava '09' , using 3.7 with cantie interface.

role77
Posts: 2
Joined: 20 Oct 2015, 08:52

Re: "Undefined error" while programming remote on new Bravo

Post by role77 » 01 Nov 2017, 12:44

No solutions so far... I tried to program the remote also with car key specialist but he did not succeed. I even bought a new key and tried to program it at official Fiat dealer, but no. There is probably something wrong with the car ECU etc...

Post Reply