Panda 2012 0.9 twinair turbo voltage bug ?

Report any bugs found in multiecuscan
Post Reply
eelco74
Posts: 3
Joined: 12 Apr 2013, 08:26

Panda 2012 0.9 twinair turbo voltage bug ?

Post by eelco74 » 09 Jun 2015, 07:28

Hi

I have been using my ELM cable on my 159 for some time now
Now my wife has a 2012 Panda twinair 85pk.

The voltage on de ECU reads 0.4 volt in Mulitecuscan, but I have 12 V (off) and 14V (running) on the battery poles.
Ecuscan says it measures on the ECU, but 0.4V can't be right as the ECU does not run on that voltage.

Is this a ecuscan bug or a major problem with the Panda.

eelco74
Posts: 3
Joined: 12 Apr 2013, 08:26

Re: Panda 2012 0.9 twinair turbo voltage bug ?

Post by eelco74 » 17 Jun 2015, 14:55

Any update on what seems to be multiecuscan reading the wrong value. 0.5V is no normal voltage to run the ECU on.

Takuihura
Posts: 1
Joined: 29 Jul 2015, 03:54
Contact:

Re: Panda 2012 0.9 twinair turbo voltage bug ?

Post by Takuihura » 29 Jul 2015, 05:07

I see that it's the best one.
Last edited by Takuihura on 07 Apr 2016, 04:13, edited 1 time in total.

Vic20
Posts: 3
Joined: 07 Jul 2015, 11:36

Re: Panda 2012 0.9 twinair turbo voltage bug ?

Post by Vic20 » 11 Dec 2015, 14:26

Scanned our Panda 2012 Twinair.

0.5v here also.

eelco74
Posts: 3
Joined: 12 Apr 2013, 08:26

Re: Panda 2012 0.9 twinair turbo voltage bug ?

Post by eelco74 » 05 Oct 2017, 07:22

Good to know that it also happens on other Panda's. The question now if it is a ecuscan bug or a bug in the Panda motor management.

Post Reply