stilo 1,6 mw connection with agv4000 kkl modus

Report any bugs found in multiecuscan
Post Reply
wilco1v
Posts: 25
Joined: 03 Feb 2010, 21:39

stilo 1,6 mw connection with agv4000 kkl modus

Post by wilco1v » 05 Feb 2010, 20:23

hi yani

did try to connect electric powersteering pin 7 k line to pin 9 eobd
my stilo mw 2003 eps did not reply , did check hardwire connection this was ok

any one else luck with this eps connection on a stilo , let me now !!

wilco1v -- holland

Teos81
Posts: 22
Joined: 23 Feb 2010, 19:17

Re: stilo 1,6 mw connection with agv4000 kkl modus

Post by Teos81 » 02 Mar 2010, 17:24

Hi,
i use a automade very ceap KL serial interface and it work great...
I also connect directly with the EPS ecu because i have no body. (only the eps fitted on a race car)
i made the jumper between the 7 (obd k line standard) and 9 (fiat k line) directly into the interface connector..

if you know about electronics or some of your friends, i could sand you the schematic for it.. But it have only the RS232(serial) interface..

Bye Bye
Matteo
Registered 2.8.2 Italian user and EPS specialist

Post Reply