Alfa 156 2.4 jtd 20v MY04 probs

Report any bugs found in multiecuscan
Post Reply
csac8600
Posts: 5
Joined: 31 Dec 2009, 15:24

Alfa 156 2.4 jtd 20v MY04 probs

Post by csac8600 » 31 Dec 2009, 15:32

Hi, first of all my warmest congratulations for this excellent piece of work! But i´ve got probs... i get connected to the ecu but the programm prompts, that the iso number is not correct and it is not possible to mark any parameter for realtime scan. fault codes are displayed and can be erased. In unidiag the identification says, that i´ve got an edc 16c9 (not 16c8!). It´s an 156 SW 2.4 jtd 20v from Juni 2004 with 175 bhp.

thx a lot and a happy new year

Max

crille_h
Posts: 3
Joined: 02 Jan 2010, 14:28

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by crille_h » 02 Jan 2010, 17:24

Hello,

What type of cable are you using to get the software to work with the ecu? I'm trying with a vag com kkl usb cable, but cannot connect to the ecu... and I have the same car as you.

Rgds,
Cris

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by yani » 02 Jan 2010, 19:53

Hi,

EDC16/CF4 will be supported in the next release.

Yani

csac8600
Posts: 5
Joined: 31 Dec 2009, 15:24

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by csac8600 » 03 Jan 2010, 12:46

Hi, i´m using a vag kkl usb cable too. Thanks yani for your quick reply!!

max

csac8600
Posts: 5
Joined: 31 Dec 2009, 15:24

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by csac8600 » 02 Feb 2010, 18:28

Hi, now with version 1.6 the iso-code-error no longer appears but i´m still not able to select any of the parameters. When i click the checkbox - nothing happens! :cry:

Please help me!

Markus

csac8600
Posts: 5
Joined: 31 Dec 2009, 15:24

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by csac8600 » 06 Feb 2010, 08:54

Does anybody have the same probs or am I the only one, who cannot click the checkboxes to select parameters. :cry:

greetings from Austria

Markus

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by yani » 06 Feb 2010, 13:40

csac8600 wrote:Hi, now with version 1.6 the iso-code-error no longer appears but i´m still not able to select any of the parameters. When i click the checkbox - nothing happens! :cry:

Please help me!

Markus
Hi,

What do you mean by nothing happens? Does the checkbox change its state checked/unchecked? Does the colour of text turn to red?
Does the program show "serial port latency" message on bottom?
Does the program show correct ECU identification data?
You can post some screenshots.

Yani

artur_k
Posts: 1
Joined: 06 Feb 2010, 18:09

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by artur_k » 06 Feb 2010, 18:13

csac8600 wrote:Does anybody have the same probs or am I the only one, who cannot click the checkboxes to select parameters. :cry:

greetings from Austria

Markus
somebody didn't read the "How TO" :roll:

you should press SPACE where you want to select the parameter - use arrow keys to slelect between the parameters :D

csac8600
Posts: 5
Joined: 31 Dec 2009, 15:24

Re: Alfa 156 2.4 jtd 20v MY04 probs

Post by csac8600 » 07 Feb 2010, 08:49

Shame on me, shame on me!!! :roll:
I was so curious about your programm, that i didn´t read the "how to" properly :oops:
Again I want to thank you for your effort! Great piece of work!!

greetings
Markus

Post Reply