Page 1 of 1

PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 03 Mar 2011, 07:44
by yani
Hi,

Pease do not use the PROXI Procedure in Multiecuscan 2.7 and 2.7.1.
There is a serious bug in the procedure for some vehicles.
I will release a fixed version later today.

Yani

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 03 Mar 2011, 08:54
by i_andrei_g
Can you tell which cars are affected ?
thx

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 03 Mar 2011, 09:37
by yani
I already released Multiecuscan 2.7.2 where this bug is fixed.

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 03 Mar 2011, 16:33
by i_andrei_g
Was only asking because in case somebody already used it.

Great Work.

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 03 Mar 2011, 19:47
by yani
The affected vehicles were: Fiat Bravo'07, Doblo, Idea, Alfa 147, GT, 159, Brera, Lancia Delta.
The problem was that the procedure says COMPLETED but actually does absolutely nothing.

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 04 Mar 2011, 02:01
by i_andrei_g
Better to do nothing than do something wrong :))
Good work for the fast fix.

Re: PROXI PROCEDURE PROBLEM multiecuscan 2.7

Posted: 04 Mar 2011, 08:12
by devc
Heh-heh! Thats why I could not clear a flashing Odometer on a Alfa 147.
Had to bullshit the customer!