Program don't recognize COM port

Report any bugs found in multiecuscan
Post Reply
stediste
Posts: 1
Joined: 21 Sep 2010, 18:37

Program don't recognize COM port

Post by stediste » 21 Sep 2010, 18:41

In my pc program says "COM3 don't exist". How can i solve it?
Top
EnIgMa
Posts: 301
Joined: 23 Mar 2010, 21:52
Location: Italy

Re: Program don't recognize COM port

Post by EnIgMa » 25 Sep 2010, 09:22

using the right port?
Top
adão carlos vieira
Posts: 30
Joined: 24 Sep 2010, 19:39

Re: Program don't recognize COM port

Post by adão carlos vieira » 09 Nov 2010, 13:49

IN my case, I first installed osoftwer accompanying the interface, choose com3 port speed and 38400, connected the ELM327 v1.4, connects and disconnects three times with an interval of 5 seconds, then open the progama in my case it scantol-net recognized the door, but the interface deveve be fed there and I opened FIATECUSCA, configure, and works without problem, but should always connect the interface twice before plugging in the car.
Top
Post Reply

Return to “Bugs”